The holder for this product is the MANU-CART™NT HPLC cartridge holder, with the product number 1.51486.
1.50973
Superspher® 60 RP-select B (4 µm) HPLC Columns
L x I.D. 250 mm x 4 mm, LiChroCART™ HPLC cartridge, manuCART™ holder required for use
Synonim(y):
TM=["Superspher"] C8 TM=["LICHROCART"] wkład do HPLC
Zaloguj się, aby wyświetlić ceny organizacyjne i kontraktowe.
Wybierz wielkość
Zmień widok
| Gabaryty przesyłki | SKU | Dostępność | Cena netto |
|---|---|---|---|
| 1 unit | Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności | 3970,00 zł |
Informacje o tej pozycji
UNSPSC Code:
41115709
NACRES:
SB.52
Particle size:
4 μm
Matrix active group:
C8 (RP8), C8 bonding phase
Pore size:
60 Å pore size
Matrix:
fully porous particle
3970,00 zł
Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności
Pomoc techniczna
Potrzebujesz pomocy? Nasz zespół doświadczonych naukowców chętnie Ci pomoże.
Pozwól nam pomócNazwa produktu
Superspher® 60 RP-select B LiChroCART™ 250-4, suitable for HPLC
material
stainless steel column
Quality Segment
agency
suitable for USP L7
product line
Superspher®
feature
endcapped: no
parameter
250 bar pressure, 60 °C max. temp.
technique(s)
HPLC: suitable, mass spectrometry (MS): suitable (Low - Medium)
column L × I.D.
25 cm × 4 mm
matrix
fully porous particle
matrix active group
C8 (RP8), C8 bonding phase
particle size
4 μm
pore size
60 Å pore size
operating pH range
2-7.5
separation technique
reversed phase
storage temp.
no temp limit
General description
HPLC cartridge
Superspher® RP-select B is a highly reproducible traditionally produced spherical silica gel carriers with reversed phase properties and the hydrophobicity of a C-8 phase. This carrier is very well suited for the separation of basic compounds, but with still good properties for the determination of neutral and acidic compounds. The high performance silica carrier with a particle size of 4µm yields an excellent pressure/separation performance ratio.This sorbent is packed into a LiChroCART 250-4 HPLC cartridge. The connection to the HPLC system is being accomplished by use of the manu-CART NT cartrige holder (1.51486).
Analysis Note
Pressure: ≤ 160 bar
Theoretical Plates (N/m) (1,2-Benzanthracene): ≥ 100000
Symmetry (1,2-Benzanthracene): 0.8 - 1.4
Capacity factor (1,2-Benzanthracene): ≥ 3.0
Theoretical Plates (N/m) (1,2-Benzanthracene): ≥ 100000
Symmetry (1,2-Benzanthracene): 0.8 - 1.4
Capacity factor (1,2-Benzanthracene): ≥ 3.0
Legal Information
LICHROCART is a trademark of Merck KGaA, Darmstadt, Germany
Superspher is a registered trademark of Merck KGaA, Darmstadt, Germany
Ta strona może zawierać tekst przetłumaczony maszynowo.
1 of 1
Ta pozycja | |||
|---|---|---|---|
| particle size 4 μm | particle size 4 μm | particle size 4 μm | particle size 4 μm |
| matrix active group C8 bonding phase | matrix active group C8 bonding phase | matrix active group C8 bonding phase | matrix active group C8 bonding phase |
| separation technique reversed phase | separation technique reversed phase | separation technique reversed phase | separation technique reversed phase |
| pore size 60 Å pore size | pore size 60 Å pore size | pore size 60 Å pore size | pore size 60 Å pore size |
| matrix fully porous particle | matrix fully porous particle | matrix fully porous particle | matrix fully porous particle |
| agency suitable for USP L7 | agency suitable for USP L7 | agency suitable for USP L7 | agency suitable for USP L7 |
Still not finding the right product?
Explore all of our products under Superspher® 60 RP-select B LiChroCART™ 250-4
Klasa składowania
11 - Combustible Solids
Certyfikaty analizy (CoA)
Poszukaj Certyfikaty analizy (CoA), wpisując numer partii/serii produktów. Numery serii i partii można znaleźć na etykiecie produktu po słowach „seria” lub „partia”.
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
Numer pozycji handlu globalnego
| SKU | NUMER GTIN |
|---|---|
| 1509730001 | 04022536234014 |
-
Superspher® 60 RP-select B (4 µm) HPLC Columns L x I.D. 250 mm x 4 mm, LiChroCART™ HPLC cartridge, manuCART™ holder required for use please specifiy the holder required for this coulmn and please give the specification and product code
1 answer-
Helpful?
-