SVSCA47FF3

Multimedia Durapore^® 1.2/0.5/0.22 µm, OptiScale^® Capsule

OptiScale^® 47, filtration area 17.7 cm², pore size 1.2/0.5/0.22 μm

• Synonim(y): Optiscale Durapore Multimedia 1.2/0.5/0.22 μm TC/TC, Multimedia Durapore^® 1.2/0.5/0.22 µm, OptiScale^® Capsule
• UNSPSC Code: 23151806
• NACRES: NB.24
• eCl@ss: 32031610

Właściwości

• Nazwa produktu: OptiScale^® 47 Capsule Media: Multimedia Durapore^® 1.2 / 0.5 / 0.22 µm, Max Pressure: 80 psi @ 25 °C
• Quality Segment: 400
• material: PVDF membrane, PVDF vent cap, fluoroelastomer FKM seal, mixed cellulose esters (MCE) membrane, mixed cellulose esters (MCE) prefilter, polycarbonate , polypropylene support
• reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• sterility: non-sterile
• sterilization compatibility: autoclavable compatible
• product line: OptiScale^® 47
• feature: hydrophilic
• manufacturer/tradename: OptiScale^®
• parameter: 25 °C max. inlet temp., 5.5 bar max. differential pressure (80 psid) at 25 °C, 5.5 bar max. inlet pressure (80 psi) at 25 °C, 70 mL process volume, 80 psig max. inlet pressure
• technique(s): sterile filtration: suitable
• L: 7.4 cm (2.91 in.)
• W: 2.75 in.
• diam.: 6.9 cm (2.7 in.)
• filtration area: 17.7 cm²
• inlet connection diam.: 3/4 in.
• outlet connection diam.: 3/4 in.
• impurities: ≤0.25 EU/mL (LAL test, Aqueous extraction)
• matrix: Multimedia Durapore^®
• pore size: 1.2/0.5/0.22 μm pore size
• bubble point: ≥3450 mbar (50 psig), air with water at 23 °C
• fitting: inlet sanitary flange, outlet sanitary flange, (19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)
• shipped in: ambient

Opis

General description

Device Configuration: Capsule

Preparation Note

Sterilization Method
3 autoclave cycles of 60 min @ 123 °C

Analysis Note

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Other Notes

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Ta strona może zawierać tekst przetłumaczony maszynowo.

Informacja o środkach bezpieczeństwa

• Klasa składowania: 11 - Combustible Solids
• wgk: WGK 3