P2B030A01

Pellicon^® 2 Mini Ultrafiltration Biomax^® Modul

This product is being discontinued as notified in July 2022. Equivalent and new generation Pellicon^® 3 cassettes are available for ordering.

• Synonym(e): Pellicon^® 2 Mini Ultrafiltration Module Biomax-30 A 0.1 m²
• UNSPSC-Code: 23151806

Eigenschaften

• Materialien: polyethersulfone ; polypropylene screen; polyurethane adhesive
• Qualitätsniveau: 400
• Hersteller/Markenname: Pellicon^®
• Parameter: 0.33 bar max. transmembrane pressure (5 psig) (reverse); 4-6 L/min recirculation rate at 1.4 bar (20 psi); 7 bar max. transmembrane pressure (100 psig) at 30 °C (forward)
• Methode(n): analytical sample preparation: suitable; protein purification: suitable
• Höhe: 1.5 cm (0.6 in.)
• Länge: 21 cm (8.3 in.)
• Breite: 5.6 cm (2.2 in.)
• Filtrationsfläche: 0.1 m²
• membrane nominal area: 0.1 m²
• Gravimetrisch bestimmte extrahierbare Substanzen: ≤1500 mg/m²
• Matrix: Biomax^®
• Porengröße: 30 kDa NMWCO
• pH-Wert: 1-14

Beschreibung

Allgemeine Beschreibung

The Pellicon^® 2 Ultrafiltration BIOMAX 30 Mini Cassette sets the standard in cassette-style tangential flow filtration devices. P2B030A01 was designed with process scale-up and applications development in mind.

Millipore′s BIOMAX 30 polyethersulfone membrane has void-free structures that guard against leakage of solutes through microdefects normally associated with voids beneath the thin skins of conventional UF membranes. These void-free membranes are more permeable, resulting in high-flux with equivalent or superior product retention. These void-free membranes provide the advantages of fast, high yield processing and smaller systems.

The Pellicon^® 2 Mini Ultrafiltration BIOMAX Module feature a filtration area of 0.1 m² with a pore size of 30 kDa NMWCO.

This product is being discontinued as notified in July 2022. Equivalent and new generation Pellicon™ 3 cassettes are available for ordering. Please contact your local representative or technical support for more information.

Anwendung

Concentration, desalting or buffer exchange of:

• Protein solutions
• Polysaccharide solutions
• Virus suspensions

Harvest, washing or clarification of:

• Cell cultures and lysates
• Colloidal suspensions
• Viral cultures

Leistungsmerkmale und Vorteile

• Type A screen (tight screen)
• Leading-edge void- free membranes to match virtually any separation challenge
• Short flow path for higher flux and higher resolution separation capability
• Choice of flow channel configuration providing process optimization capability
• Predictable, fast, scale-up
• True linear scalability from laboratory size modules to industrial assemblies for processing thousands of liters
• Brings higher resolution, improved yields and superior back-pressure resistance
• Ultracel membranes are composite membranes cast on a microporous substrate for defect-free membranes with superior

Sonstige Hinweise

Diese Produkte werden in einem Werk hergestellt, das den GMP-Richtlinien der FDA entspricht.

Prefiltration Rquirements: 100 µm

Hinweis zur Analyse

Gravimetric Extractables: after a water flush

Rechtliche Hinweise

BIOMAX is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

Sicherheitshinweise

• Lagerklassenschlüssel: 10 - Combustible liquids
• WGK: WGK 2