This product has not been tested specifically in tissue culture applications. As polystyrene is not autoclavable, they would need ethylene oxide gas sterilization or gamma irradiation for aseptic experiments.
59769
Micro particles based on polystyrene
size: 500 nm
Sinónimos:
Latex beads from PS
Iniciar sesión para ver los precios por organización y contrato.
Seleccione un Tamaño
Cambiar Vistas
| A ustedes/SKU | Disponibilidad | Precio |
|---|---|---|
5 mL | Comprobar disponibilidad del carrito | $612.000 |
10 mL | Comprobar disponibilidad del carrito | $1.000.000 |
Acerca de este artículo
Servicio técnico
¿Necesita ayuda? Nuestro equipo de científicos experimentados está aquí para ayudarle.
Permítanos ayudarleQuality Segment
form
aqueous suspension
concentration
10% (solids)
particle size
500 nm
density
1.05 g/cm3
storage temp.
2-8°C
General description
Micro Particles or Latex Beads, commonly known as polystyrene microparticles, are negatively charged colloidal particles. The microparticles are produced through a polymerization reaction of styrene under controlled conditions. The conducive environment of the reaction induces spontaneous coalescent bead formation. Micro Particles or Latex beads are supplied in aqueous solutions composed of polymer particles with water. Polystyrene′s refractive index at 589 nm is 1.5905 and 1.602 at 486 nm.
Application
Micro Particles or Latex Beads is used for a wide variety of applications like:
- Electron Microscopy.
- Cell Counter Calibration.
- Immunodiagnostics, especially for latex agglutination tests, and
- Phagocytosis Research.
Analysis Note
For every lot exact values of particle size and standard deviation are determined with an accuracy of 0.01 μm using a Coulter Multisizer.
1 of 1
Este artículo | |||
|---|---|---|---|
| particle size 500 nm | particle size 100 nm std dev ≤0.01 μm | particle size 1 μm std dev <0.1 μm, coeff var <5% | particle size 10 μm std dev <0.2 μm, coeff var <2% |
| form aqueous suspension | form aqueous suspension | form aqueous suspension | form aqueous suspension |
| concentration 10% (solids) | concentration 10% (solids) | concentration 10% (solids) | concentration 10% (solids) |
| storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C |
| Quality Level 100 | Quality Level 100 | Quality Level 100 | Quality Level 100 |
| density 1.05 g/cm3 | density 1.05 g/cm3 | density 1.05 g/cm3 | density 1.05 g/cm3 |
Still not finding the right product?
Explore all of our products under Micro particles based on polystyrene
Clase de almacenamiento
10 - Combustible liquids
wgk
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
Eyeshields, Gloves
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
-
Are the microparticles suitable for direct use in aseptic experiments (e.g. tissue culture)? If no, how may they be sterilised for such work?
1 answer-
Helpful?
-
-
What is the Mw of the PS microsphere?
1 answer-
The molecular weight of the polystyrene has not been determined.
Helpful?
-
-
We would like to use the PSL for an aerosol particle generator. Is there any recommended dilution?
1 answer-
This solution contains 10% solids. The product is not tested for suitability in any specific application. The end user would have to determine the appropriate dilution, experimentally. A suggestion would be to initially try the solution neat followed by further serial 2 or 4 fold dilutions in an attempt to determine the optimum concentration for the application. Please see the links below to review publications which may be helpful:
https://www.tandfonline.com/doi/full/10.1080/02786826.2013.868594
https://www.tandfonline.com/doi/full/10.1080/02786826.2018.1505032
Helpful?
-
-
Does the material with part number 59769 contain surfactant to aid in dispersibility? Also, what is the pH of this material?
1 answer-
The product polystyrene microparticles does not contain surfactants and comes in deionized water. The particles have an anionic surface charge due to sulfate groups coming from the initiator in the polymerization reaction. Additionally, the particles’ Zeta potential is in the – 50 mV region over a wide pH range from approximately 2 through 10.
Helpful?
-
-
Does this product have surfactants?
1 answer-
Product 59769 - Polystyrene microparticles do not contain surfactants. The polystyrene microparticles are supplied in deionized water.
Helpful?
-