Saltar al contenido
Merck

A9226

Sigma-Aldrich

Alkaline buffer solution

1.5 M, pH 10.3 (25 °C)

Sinónimos:

Basic pH buffer

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización

Seleccione un Tamaño

100 ML
96,70 €

96,70 €


Póngase en contacto con nuestro Servicio de Atención al Cliente para disponibilidad

Solicitar un pedido a granel

Seleccione un Tamaño

Cambiar Vistas
100 ML
96,70 €

About This Item

Código UNSPSC:
12161700
NACRES:
NA.25

96,70 €


Póngase en contacto con nuestro Servicio de Atención al Cliente para disponibilidad

Solicitar un pedido a granel

Formulario

liquid

concentración

1.5 M

pH

10.3 (25 °C)

temp. de almacenamiento

2-8°C

Categorías relacionadas

Descripción general

Alkaline buffer solution, 1.5 M, pH 10.3 at 25 °C is used in alkaline phosphatase reactions. It contains 2-amino-2-methylpropanol (AMP) and is used in conjunction with p-nitrophenyl phosphate (pNPP) enzyme substrate.

Aplicación

Alkaline buffer solution has been used to measure the alkaline phosphatase (ALP) activity in the:
  • rat bone marrow stromal cells (BMSC)[1]
  • osteoblast-like cells (SaoS-2, ATCC HTB 85)[2]
  • mouse MC3T3-E1[3]

Otras notas

Contains 2-amino-2-methylpropanol

Pictogramas

Corrosion

Palabra de señalización

Danger

Frases de peligro

Clasificaciones de peligro

Eye Dam. 1 - Skin Irrit. 2

Código de clase de almacenamiento

12 - Non Combustible Liquids

Clase de riesgo para el agua (WGK)

WGK 1

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Young-Hee Kim et al.
BMC pharmacology & toxicology, 14, 60-60 (2013-12-03)
Indoxyl sulfate (IS), an organic anion uremic toxin, promotes the progression of renal dysfunction. Some studies have suggested that IS inhibits osteoclast differentiation and suppresses parathyroid hormone (PTH)-stimulated intracellular cAMP production, decreases PTH receptor expression, and induces oxidative stress in
Salima Nedjari et al.
Scientific reports, 7(1), 15947-15947 (2017-11-23)
Stem cells therapy offers a viable alternative for treatment of bone disorders to the conventional bone grafting. However clinical therapies are still hindered by the insufficient knowledge on the conditions that maximize stem cells differentiation. Hereby, we introduce a novel
Pin Huang et al.
Colloids and surfaces. B, Biointerfaces, 160, 628-638 (2017-10-17)
Increased use of reconstruction procedures in orthopedics has improved the life of patients undergoing surgery. However, surgical site infection remains a major challenge. Efforts were made to fabricate antibacterial surfaces with good biocompatibility. This present study aimed to fabricate zinc-incorporated
Helle Lysdahl et al.
BioResearch open access, 3(6), 278-285 (2014-12-04)
Clinical trials using bone morphogenetic protein-2 (BMP2) for bone reconstruction have shown promising results. However, the relatively high concentration needed to be effective raises concerns for efficacy and safety. The aim of this study was to investigate the osteogenic effect
C Caparrós et al.
Journal of the mechanical behavior of biomedical materials, 39, 79-86 (2014-08-12)
The generation of titanium foams is a promising strategy for modifying the mechanical properties of intervertebral reinforcements. Thus, the aim of this study was to compare the in vitro biological response of Ti6Al4V alloys with different pore sizes for use

Preguntas

1–2 de 2 Preguntas  
  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 respuesta
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      ¿Le ha resultado útil?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 respuesta
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      ¿Le ha resultado útil?

Revisiones

Sin puntuación

Filtros activos

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico