Pular para o conteúdo
Merck
  • Potential analytical interferences and seasonal variability in diethyltoluamide environmental monitoring programs.

Potential analytical interferences and seasonal variability in diethyltoluamide environmental monitoring programs.

Chemosphere (2015-03-10)
Sylvain Merel, Andrey I Nikiforov, Shane A Snyder
RESUMO

N,N-diethyl-m-toluamide (DEET), the active component of many insect repellents, is among the most frequently detected compounds in aqueous environments with concentrations reported in the ng L(-1) to μg L(-1) range. However, DEET is often detected in blanks and reported concentrations differ significantly depending on the analytical technique employed. In addition, relatively sparse data are available regarding the seasonal variability of DEET concentrations in water and there are apparent inconsistencies with expected use patterns. Therefore, the present study investigates potential interferences affecting the detection and quantification of DEET then the geographical and seasonal variations of DEET concentrations. To examine potential analytical interferences, DEET was analyzed in five geographically-diverse wastewater effluents using both gas chromatography and liquid chromatography coupled to mass spectrometric detectors. At times, the concentrations quantified by the employed analytical methods varied significantly. Five compounds with similar molecular weights and structures as DEET were investigated as potential mimics and some were shown to induce an overestimation of DEET. Further experimentation suggested that the solvents used in sample preparation and HPLC analysis are another possible source of interference. Besides potential interferences, the seven-month weekly monitoring of DEET in the primary effluent of a wastewater treatment plant demonstrated a clear seasonal trend with decreasing concentration from summer to winter. These data collectively demonstrate that there are many challenges in the quantification of DEET in complex environmental samples and that co-occurrence of similarly structured substances present in the water sample and/or the solvents used for the analysis could induce analytical bias.

MATERIAIS
Número do produto
Marca
Descrição do produto

Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Metanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Diclorometano, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Acetonitrilo, HPLC Plus, ≥99.9%
Sigma-Aldrich
Diclorometano, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Diclorometano, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
Metil-terc-butil éter, suitable for HPLC, ≥99.8%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Ácido fórmico, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Sigma-Aldrich
Acetonitrilo, ACS reagent, ≥99.5%
Sigma-Aldrich
Metil-terc-butil éter, ACS reagent, ≥99.0%
Sigma-Aldrich
Acetonitrilo, for HPLC, for UV, ≥99.9% (GC)
Sigma-Aldrich
Metil-terc-butil éter, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
Sigma-Aldrich
Acetonitrilo, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Metanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Diclorometano, puriss. p.a., ACS reagent, reag. ISO, ≥99.9% (GC)
Sigma-Aldrich
Diclorometano, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Metanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Ácido fórmico, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥88%
Sigma-Aldrich
Metanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Metil-terc-butil éter, reagent grade, ≥98%
Sigma-Aldrich
Acetonitrilo, suitable for HPLC-GC, ≥99.8% (GC)
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Metanol, BioReagent, ≥99.93%