Saltar al contenido
Merck
Todas las fotos(1)

Documentos

A6582

Sigma-Aldrich

Antifoam A concentrate

active silicone polymer 100%

Sinónimos:

Antifoam agent, Antifoam solution, Foam control agent

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

UNSPSC Code:
12161901
NACRES:
NA.85

Quality Level

200

form

emulsion (aqueous)

technique(s)

cell culture | hybridoma: suitable
microbiological culture: suitable

density

0.97 g/mL at 25 °C

application(s)

microbiology

storage temp.

room temp

suitability

(Mammalian (suspension))
bacteria (fermentation)

General description

Antifoam A is a silicone-based product used to prevent or minimize foaming in both microbial fermentation systems and mammalian suspension cultures. Control of foaming minimizes damage to the cells, resulting in increased protein/antibody production. Extremely effective for aqueous and non-aqueous systems. Effective at concentrations in the 1-50ppm range.

Application

Antifoam A concentrate has been used:
  • in bioreactor culture for Staphylococcal enterotoxin C (SEC) production.
  • to prevent foam formation during the aerobic treatment of sludge.
  • to study the impact of surface tension on bioaerosol generation during bubbling.

Features and Benefits

  • Molecular biology grade and tested for use in bacterial fermentation.
  • Extremely effective foam suppressor for aqueous and non-aqueous systems.
  • Made of 100% active silicone polymer, free of emulsifiers.
  • Typically, effective at 1-100 ppm.
  • Product will be stable in the pH range of 5 to 9.
  • Can be directly added to a fermentation medium but it is not recommended that it be pumped to a fermenter on an as-needed basis.

Components

Antifoam A is a 100% active silicon polymer containing no non-ionic emulsifiers .

Preparation Note

Antifoam A can be pre-diluted with 3-10 parts of aqueous propylene glycol or non-aqueous vegetable oil with slow mixing.

related product

Referencia del producto
Descripción
Precios

pictograms

Environment
GHS09

signalword

Warning

hcodes

H410

Hazard Classifications

Aquatic Acute 1 - Aquatic Chronic 1

Storage Class

10 - Combustible liquids

wgk_germany

WGK 3

flash_point_f

>213.8 °F - closed cup

flash_point_c

> 101 °C - closed cup

ppe

Eyeshields, Gloves, type ABEK (EN14387) respirator filter

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

The biodegradability of aquatic worm predated waste activated sludge: A sequential aerobic and anaerobic treatment approach
de Valk S, et al.
bioresource technology reports, 12.0, 100606-100606 (2020)
Bioaerosol Release from Concentrated Microbial Suspensions in Bubbling Processes
Kruglyakova E, et al.
Air quality, atmosphere, & health, 13.0, 2029-2029 (2022)
Experience with a perfo-suction system for the recovery of schistosomes from laboratory rodents
T. F. H. G. Jackson, C. D. Dettman, et al.
Laboratory Animal Science, 16, 65-67 (1982)
Factors affecting staphylococcal enterotoxin C bovine production in milk
Hunt K, et al.
International dairy journal, 39(1), 41-46 (2014)
F P Ernani et al.
Infection and immunity, 61(6), 2596-2601 (1993-06-01)
Substantial evidence indicates that molecules released by infectious organisms affect virulence and influence immunity to infection. The characterization of extracellular molecules and their mechanism of release is therefore critical to understanding host-parasite relationships. The cestode parasite Mesocestoides corti is known
Ver todos los artículos relacionados

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico