For this product, 90% of the particles are smaller than 150 microns. There is no difference in purity among quality levels 100, 200, and reagent grade. More information can be found in the link below:
https://www.sigmaaldrich.com/life-science/quality-and-regulatory-management/m-clarity-program?srsltid=AfmBOoqhOfy2gJVaUQf8RNVM0eRQKfuqMcSGFl0rj60jAw3BEfHBQpyt
1.01091
Aluminium hydroxide
powder, hydrargillite EMPLURA®
Synonyme(s) :
Aluminium hydroxide, Hydrargillite
Se connecter pour consulter les tarifs organisationnels et contractuels.
Sélectionner une taille de conditionnement
Changer de vue
| Conditionnement | Référence | Disponibilité | Prix |
|---|
A propos de cet article
Formule linéaire :
Al(OH)3 · x H2O
Numéro CAS:
Poids moléculaire :
78.00
UNSPSC Code:
12352305
EC Index Number:
244-492-7
NACRES:
NA.21
MDL number:
Form:
powder
Le tarif et la disponibilité ne sont pas disponibles actuellement.
Service technique
Besoin d'aide ? Notre équipe de scientifiques expérimentés est là pour vous.
Laissez-nous vous aidervapor pressure
<0.1 hPa ( 20 °C)
Quality Segment
product line
EMPLURA®
form
powder
loss
30.0-35.0% loss on ignition, 700°C
pH
8-9 (20 °C, 100 g/L in H2O, slurry)
mp
300 °C (Elimination of water of crystallisation)
solubility
water: insoluble at 20 °C
density
2.42 g/cm3 at 20 °C
bulk density
~90 g/100 mL
anion traces
chloride (Cl-): ≤0.01%, sulfate (SO42-): ≤0.05%
cation traces
Fe: ≤0.01%, Na: ≤0.3%
storage temp.
2-30°C
SMILES string
[Al].O.O.O
InChI
1S/Al.3H2O/h;3*1H2
InChI key
MXRIRQGCELJRSN-UHFFFAOYSA-N
Application
- Investigation into the Influence of the Process Parameters on the Stability of a Poly(Vinyl)-Alcohol-Based Coating System.: Discusses the stabilization of polymeric materials using aluminium hydroxide, emphasizing its importance in material science for enhancing the durability and performance of coatings (Canale et al., 2024).
Analysis Note
Identity: conforms
Chloride (Cl): ≤ 0.01 %
Sulfate (SO): ≤ 0.05 %
Fe (Iron): ≤ 0.01 %
Na (Sodium): ≤ 0.3 %
Loss on ignition (700°C): 30.0 - 35.0 %
Bulk density: about 90 g/100ml
Particle size (< 150 µm): about 90
Chloride (Cl): ≤ 0.01 %
Sulfate (SO): ≤ 0.05 %
Fe (Iron): ≤ 0.01 %
Na (Sodium): ≤ 0.3 %
Loss on ignition (700°C): 30.0 - 35.0 %
Bulk density: about 90 g/100ml
Particle size (< 150 µm): about 90
Legal Information
EMPLURA is a registered trademark of Merck KGaA, Darmstadt, Germany
1 of 1
Cet article | |||
|---|---|---|---|
| Quality Level 200 | Quality Level 100 | Quality Level 100 | Quality Level 100 |
| form powder | form - | form powder | form powder |
| pH 8-9 (20 °C, 100 g/L in H2O, slurry) | pH 8-9 (20 °C, 100 g/L in H2O, slurry) | pH - | pH - |
| storage temp. 2-30°C | storage temp. - | storage temp. - | storage temp. - |
| solubility water: insoluble at 20 °C | solubility - | solubility - | solubility - |
| mp 300 °C (Elimination of water of crystallisation) | mp 300 °C (Elimination of water of crystallisation) | mp - | mp - |
Classe de stockage
13 - Non Combustible Solids
wgk
nwg
flash_point_f
Not applicable
flash_point_c
Not applicable
Certificats d'analyse (COA)
Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Contenu apparenté
Numéro d'article de commerce international
| Référence | GTIN |
|---|---|
| 1010911000 | 04022536015729 |
| 1010919050 | 04022536015736 |
-
Hi, I just wonder if there is any information about the particle size distribution of Aluminium hydroxide. Also, what is the difference between quality level 100, 200, and reagent grade, purity?
1 answer-
Helpful?
-