Direkt zum Inhalt
Merck
  • Selective formation of organo, organo-aqueous, and hydro gel-like materials from partially hydrolysed poly(vinyl acetate)s based on different boron-containing crosslinkers.

Selective formation of organo, organo-aqueous, and hydro gel-like materials from partially hydrolysed poly(vinyl acetate)s based on different boron-containing crosslinkers.

Soft matter (2015-06-02)
L V Angelova, M Leskes, B H Berrie, R G Weiss
ZUSAMMENFASSUNG

Viscoelastic, gel-like, polymeric dispersions (HVPDs) can be prepared by crosslinking polyols with borax or boric acid in water under alkaline conditions. Rheologically similar HVPDs have been prepared in organic liquids containing no water or hydroxylic groups through crosslinking partially or fully hydrolysed poly(vinyl acetate)s with trimethyl borate, boric acid, or borax. The organo-HVPDs are water-sensitive and rheoreversible on exposure to water. They were characterised rheologically and by solution and solid-state (11)B NMR spectroscopy. Spectroscopic analyses show the presence of mono- and di-diol crosslinks, as well as non-crosslinked boron species in HVPDs prepared with trimethyl borate or boric acid. The number of crosslinks in organo-HVPDs prepared with borax increased over the course of several days. Results from solution and solid-state (11)B NMR spectroscopy are comparable; no solid-like component was detectable. We demonstrate that hydro, organo, or organo-aqueous HVPDs can be obtained from partially hydrolysed poly(vinyl acetate)s by 'tuning' the structure of the boron-based crosslinker.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Dimethylsulfoxid, Hybri-Max, sterile-filtered, BioReagent, suitable for hybridoma, ≥99.7%
Sigma-Aldrich
Dimethylsulfoxid, for molecular biology
Sigma-Aldrich
Dimethylsulfoxid-d6, 99.9 atom % D
Sigma-Aldrich
Dimethylsulfoxid, sterile-filtered, BioPerformance Certified, meets EP, USP testing specifications, suitable for hybridoma
Sigma-Aldrich
Dimethylsulfoxid-d6, 99.9 atom % D, contains 0.03 % (v/v) TMS
Sigma-Aldrich
N,N-Dimethylformamid, anhydrous, 99.8%
Sigma-Aldrich
Dimethylsulfoxid, ≥99.5% (GC), suitable for plant cell culture
Sigma-Aldrich
Dimethylsulfoxid, anhydrous, ≥99.9%
Sigma-Aldrich
Natriumhydrid, 60 % dispersion in mineral oil
Sigma-Aldrich
Dimethylsulfoxid-d6, 99.5 atom % D
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
N,N-Dimethylformamid, for molecular biology, ≥99%
Sigma-Aldrich
Dimethylsulfoxid, BioUltra, for molecular biology, ≥99.5% (GC)
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidin, ≥99%
Sigma-Aldrich
Natriumhydrid, dry, 90%
Sigma-Aldrich
Dimethylsulfoxid-d6, "100%", 99.96 atom % D
Sigma-Aldrich
Trimethylborat, ≥98%
Sigma-Aldrich
Natriummethoxid -Lösung, 25 wt. % in methanol
Sigma-Aldrich
Dimethylsulfoxid-d6, anhydrous, 99.9 atom % D
Sigma-Aldrich
Dimethylsulfoxid, PCR Reagent
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidin, ≥98% (TLC)
Sigma-Aldrich
Dimethylsulfoxid-d6, 99.9 atom % D, contains 1 % (v/v) TMS
Sigma-Aldrich
Natriummethoxid, reagent grade, 95%, powder
Sigma-Aldrich
Dimethylsulfoxid, meets EP testing specifications, meets USP testing specifications
Sigma-Aldrich
Natriummethoxid -Lösung, ACS reagent, 0.5 M CH3ONa in methanol (0.5N)
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidin, ≥98.0% (NT)
Sigma-Aldrich
Dimethylsulfoxid-d6, "100%", 99.96 atom % D, contains 0.03 % (v/v) TMS
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidin, tablet, 1 mg substrate per tablet
Sigma-Aldrich
Dimethylsulfoxid-d6, "Special HOH", ≥99.9 atom % D
Sigma-Aldrich
Natriumtetraborat Decahydrat, BioXtra, ≥99.5%