The screw cap may be subjected to baking; however, this does not apply to the septa. It is recommended to obtain new caps, as there is no guarantee for effectively cleaning the used ones, and no established procedure for this purpose is available.
SU860101
Magnetic Screw Cap for Headspace Vials, 18 mm thread
PTFE/silicone septum (white PTFE/tranparent blue silicone), septum thickness 1.3 mm, pkg of 100 ea
Szinonimák:
18 mm magnetic screw cap for vials
Méret kiválasztása
36 800,00 Ft
Méret kiválasztása
About This Item
36 800,00 Ft
Javasolt termékek
Anyagok
PTFE/silicone septum (white PTFE/tranparent blue silicone)
stainless steel screw cap (magnetic, open-top, 8 mm center hole)
Jellemzők
closure type stainless steel hole cap
keménység
35 (Durometer: shore A)
kiszerelés
pkg of 100 ea
külső átmérő × Ma
18 mm × 11 mm
szeptum vastagság
1.3 mm
szerelvény
thread for 18 mm
Looking for similar products? Látogasson el ide Útmutató a termékösszehasonlításhoz
Általános leírás
kapcsolódó termék
Válasszon a legfrissebb verziók közül:
Analitikai tanúsítványok (COA)
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Dokumentumok section.
Ha segítségre van szüksége, lépjen velünk kapcsolatba Vevőszolgálat
Már rendelkezik ezzel a termékkel?
Az Ön által nemrégiben megvásárolt termékekre vonatkozó dokumentumokat a Dokumentumtárban találja.
Az ügyfelek ezeket is megtekintették
Cikkek
Study demonstrates SPME of BPA from an energy drink using an overcoated PDMS/DVB fiber, followed by GC/MS/MS analysis.
The work describes the development of an HS-SPME-GC-MS method to determine 2-chloroethanol as a marker of fumigant ethylene oxide in different kinds of sesame seed samples.
Protocols
Overcoated SPME fiber enables low-level BPA analysis in food via SPME-GC-MS/MS, meeting tighter migration limit regulations.
High performance, reliability, and reproducibility of HS-SPME in combination with GC/MS for the determination of VOCs in water was proven in an interlaboratory trial. The new ISO 17943 using HS-SPME is an improvement on existing official methods for this determination in terms of sensitivity and selectivity.
-
Is it acceptable to heat the Magnetic Screw Cap for Headspace Vials, 18 mm thread, at 350°F / 177°C? Is there a recommended procedure for heating these caps to clean any residual substances or to prevent ghost peaks in SPME analysis?
1 answer-
Helpful?
-
Active Filters
Tudóscsoportunk valamennyi kutatási területen rendelkezik tapasztalattal, beleértve az élettudományt, az anyagtudományt, a kémiai szintézist, a kromatográfiát, az analitikát és még sok más területet.
Lépjen kapcsolatba a szaktanácsadással