Passa al contenuto
Merck

Stability-indicating chromatographic methods for the determination of sertindole.

Journal of chromatographic science (2013-06-05)
Nariman A El-Ragehy, Nagiba Y Hassan, Mohamed Abdelkawy, Mahmoud A Tantawy
ABSTRACT

In this work, two chromatographic methods have been developed and validated for the determination of sertindole (an antipsychotic agent) in the presence of its oxidative degradation product. Sertindole was subjected to stress stability studies, including acid, alkali, oxidative, photolytic and thermal degradation. The chromatographic methods included the use of thin-layer chromatography (TLC-densitometry) and high-performance liquid chromatography (HPLC). The TLC method employed aluminum TLC plates precoated with silica gel G.F254 as the stationary phase and methanol-ethyl acetate-33% ammonia (1:9:0.1, by volume) as the mobile phase, and the chromatograms were scanned at 227 nm. The developed HPLC method used a reversed-phase C18 column with isocratic elution. The mobile phase was composed of phosphate buffer pH 3.0-acetonitrile-triethylamine (45:55:0.03, by volume) and run at a flow rate of 1.0 mL/min. Quantitation was achieved with ultraviolet detection at 256 nm. The linearity ranges were found to be 2-14 µg/band and 5-200 µg/mL for TLC and HPLC, respectively. The developed methods were validated according to the International Conference on Harmonization guidelines and were applied for bulk powder and dosage forms.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Acetonitrile, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Metanolo, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Metanolo, ACS reagent, ≥99.8%
Sigma-Aldrich
Acetonitrile, HPLC Plus, ≥99.9%
Sigma-Aldrich
Sodio idrossido, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Idrossido di sodio, 50% in H2O
Sigma-Aldrich
Metanolo, HPLC Plus, ≥99.9%
Sigma-Aldrich
Acetonitrile, ACS reagent, ≥99.5%
Sigma-Aldrich
Idrossido di sodio, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Acetonitrile, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Sodio idrossido, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Metanolo, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Idrossido di sodio, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodio idrossido, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, powder
Sigma-Aldrich
Metanolo, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Sodio idrossido, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Trietilammina, BioUltra, ≥99.5% (GC)
Sigma-Aldrich
Acetonitrile, anhydrous, 99.8%
Sigma-Aldrich
Metanolo, Absolute - Acetone free
Sigma-Aldrich
Metanolo, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Metanolo, BioReagent, ≥99.93%
Sigma-Aldrich
Idrossido di sodio, 5.0 M
Sigma-Aldrich
Metanolo, ACS reagent, ≥99.8%
Sigma-Aldrich
Sodio idrossido, beads, 16-60 mesh, reagent grade, 97%
USP
Metanolo, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Acetonitrile, biotech. grade, ≥99.93%
Sigma-Aldrich
Trietilammina, ≥99.5%
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, flakes