Összes fotó(1)
Fontos dokumentumok
Z742928
Detonox® detergent, ultimate precision cleaner
pkg of 3.8 L
Szinonimák:
USDA authorized cleaner, alkaline detergent, emulsifying detergent, low foam cleaner, machine washing detergent
Bejelentkezésa Szervezeti és Szerződéses árazás megtekintéséhez
Összes fotó(1)
About This Item
UNSPSC kód:
47131800
NACRES:
NB.34
Javasolt termékek
kiszerelés
pkg of 3.8 L
pkg of 4 × 3.8 L
gyártó/kereskedő neve
Alconox, Inc. 2301 (4 x 3.8 L)
Alconox, Inc. 2301-1 (3.8 L)
Általános leírás
Detonox Ultimate Precision Cleaner
Used to remove: Cosmetic bases and formulations, organics, grease, tars, resins, waxes, fats, oils, titanium and zinc oxides, ointments and lotions.
Surfaces cleaned: Recommended for glass, stainless steel, PTFE, ceramic, cement and solvent resistant plastics and metals. Corrosion testing is advisable.
Cleaning method: Soak, circulate under immersions, ultrasonic cleaners, and manual cleaning.
Diections:
Make a fresh 1-3% solution (1 ¼ - 3 3/4 oz. per gal. or 10-30 ml per liter) in cold, warm or hot water. If available, use very hot water to clean cosmetic residues. For difficult soils, raise water temperature and use more detergent. Elevation of temperature is true under most circumstances. Check with Alconox Inc, for use of hot water if products contain Titanium Oxide (TiO) or Zinc Oxide (ZnO) as
they are notable exceptions to heat expediting detergency. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam.
RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in purified water.
Caution: Contains anionic and nonionic surfactants with phosphate chelating agents. May cause skin and eye irritation. Wear eye protection and chemical resistant gloves.
- Concentrated to save you money
- Exceptional cosmetic and pharmaceutical polymer, cream and lotion removal
- Non-caustic for greater worker safety and greater material compatibility
- Free rinsing to give you reliable results and no interfering residues
Used to remove: Cosmetic bases and formulations, organics, grease, tars, resins, waxes, fats, oils, titanium and zinc oxides, ointments and lotions.
Surfaces cleaned: Recommended for glass, stainless steel, PTFE, ceramic, cement and solvent resistant plastics and metals. Corrosion testing is advisable.
Cleaning method: Soak, circulate under immersions, ultrasonic cleaners, and manual cleaning.
Diections:
Make a fresh 1-3% solution (1 ¼ - 3 3/4 oz. per gal. or 10-30 ml per liter) in cold, warm or hot water. If available, use very hot water to clean cosmetic residues. For difficult soils, raise water temperature and use more detergent. Elevation of temperature is true under most circumstances. Check with Alconox Inc, for use of hot water if products contain Titanium Oxide (TiO) or Zinc Oxide (ZnO) as
they are notable exceptions to heat expediting detergency. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam.
RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in purified water.
Caution: Contains anionic and nonionic surfactants with phosphate chelating agents. May cause skin and eye irritation. Wear eye protection and chemical resistant gloves.
Jogi információk
Detonox is a registered trademark of Alconox, Inc.
Figyelmeztetés
Danger
Figyelmeztető mondatok
Óvintézkedésre vonatkozó mondatok
Veszélyességi osztályok
Eye Dam. 1 - Skin Irrit. 2
Tárolási osztály kódja
10 - Combustible liquids
WGK
WGK 3
Válasszon a legfrissebb verziók közül:
Analitikai tanúsítványok (COA)
Lot/Batch Number
Sajnos jelenleg COA nem áll rendelkezésre ehhez a termékhez online.
Ha segítségre van szüksége, lépjen velünk kapcsolatba Vevőszolgálat
Már rendelkezik ezzel a termékkel?
Az Ön által nemrégiben megvásárolt termékekre vonatkozó dokumentumokat a Dokumentumtárban találja.
Tudóscsoportunk valamennyi kutatási területen rendelkezik tapasztalattal, beleértve az élettudományt, az anyagtudományt, a kémiai szintézist, a kromatográfiát, az analitikát és még sok más területet.
Lépjen kapcsolatba a szaktanácsadással