Adsorption of water vapour from humid air in carbon molecular sieves: carbosieve S-III and carboxens 569, 1000 and 1001.

Adsorption of water vapour from humid air in carbon molecular sieves: carbosieve S-III and carboxens 569, 1000 and 1001.

The Analyst (2003-03-11)

Patrycja Fastyn, Wojciech Kornacki, Malgorzata Kardaś, Janusz Gawlowski, Jan Niedzielski

RESUMO

The adsorption of water vapour in carbon molecular sieves (CMS) used to determine volatile organic compounds (VOCs) in air was investigated. The CMS mass in the trap was found not to affect the mass of retained water under conditions of incomplete saturation of the adsorbent bed with water. Thus, the restrictions commonly imposed on the CMS mass are not necessary. The usefulness of four different CMSs to sample large volumes of humid air was estimated. Carboxen 1000 exhibited the best performance. To assess the magnitude of CMS mass in the trap in dependence on the volume, the relative humidity and the temperature of the sample, the use of a novel parameter, called the water vapour interference factor, was suggested.

MATERIAIS

Número do produto

Marca

Descrição do produto

57348-U

Supelco

Conjunto de fibras para SPME de divinilbenzeno-carboxeno-polidimetilsiloxano (DVB/CAR/PDMS), needle size 24 ga, StableFlex

57328-U

Supelco

Conjunto de fibras para SPME de divinilbenzeno-carboxeno-polidimetilsiloxano (DVB/CAR/PDMS), needle size 24 ga, for use with manual holder

57298-U

Supelco

Conjunto de fibras para SPME de divinilbenzeno-carboxeno-polidimetilsiloxano (DVB/CAR/PDMS), needle size 23 ga, StableFlex, for use with autosampler

57299-U

Supelco

Conjunto de fibras para SPME de divinilbenzeno-carboxeno-polidimetilsiloxano (DVB/CAR/PDMS), needle size 23 ga, StableFlex, for use with manual holder or autosampler, fiber L 2 cm

20358

Supelco

ORBO^™ 90 Carboxen^® 564 (20/45), 160/80 mg, W,F,F separators, O.D. × L 6 mm × 75 mm, pkg of 25 ea, for analyte group MEK (methylethyl ketone)

57329-U

Supelco

Conjunto de fibras para SPME de divinilbenzeno-carboxeno-polidimetilsiloxano (DVB/CAR/PDMS), needle size 24 ga, StableFlex, for use with autosampler

57318

Supelco

Conjunto de fibras de SPME Carboxeno/polidimetilsiloxano (CAR/PDMS), d_f 75 μm(CAR/PDMS, for use with manual holder, needle size 24 ga

10478-U

Supelco

Adsorvente Carboxen^®, matrix Carboxen^® 1000, 60-80 mesh, bottle of 10 g

25467

Supelco

Carboxen^®-1010 PLOT Capillary GC Column, L × I.D. 30 m × 0.53 mm, average thickness 30 μm

20355

Supelco

ORBO^™ 78 HBr on Carboxen^® 564 specially cleaned (20/45), 400/200 mg, W,W,W separators, O.D. × L 6 mm × 110 mm, pkg of 25 ea

25461

Supelco

Coluna de GC capilar Carboxen^®-1006 PLOT, L × I.D. 30 m × 0.53 mm, average thickness 30 μm

57295-U

Supelco

Conjunto de fibras de SPME Carboxeno/polidimetilsiloxano (CAR/PDMS), d_f 85 μm(CAR/PDMS, needle size 23 ga, StableFlex, for use with autosampler

57319

Supelco

Conjunto de fibras de SPME Carboxeno/polidimetilsiloxano (CAR/PDMS), d_f 75 μm(CAR/PDMS, needle size 24 ga, for use with autosampler

57335-U

Supelco

Conjunto de fibras de SPME Carboxeno/polidimetilsiloxano (CAR/PDMS), d_f 85 μm(CAR/PDMS, needle size 24 ga, StableFlex, for use with autosampler

24246

Supelco

Carboxen^®-1010 PLOT Capillary GC Column, L × I.D. 30 m × 0.32 mm, average thickness 15 μm

57334-U

Supelco

Conjunto de fibras de SPME Carboxeno/polidimetilsiloxano (CAR/PDMS), d_f 85 μm(CAR/PDMS, needle size 24 ga, for use with manual holder, StableFlex fiber

10184

Supelco

Carbosieve Adsorbent, matrix Carbosieve S-III, 60-80 mesh, bottle of 10 g

57343-U

Supelco

Conjunto de fibras de SPME Carboxeno/polidimetilsiloxano (CAR/PDMS), d_f 75 μm(CAR/PDMS, needle size 23 ga, for use with autosampler

57344-U

Supelco

Conjunto de fibras de SPME Carboxeno/polidimetilsiloxano (CAR/PDMS), d_f 75 μm(CAR/PDMS, needle size 23 ga, for use with manual holder

24241-U

Supelco

Coluna de GC capilar Carboxen^®-1006 PLOT, L × I.D. 30 m × 0.32 mm, average thickness 15 μm

11072-U

Supelco

Adsorvente Carboxen^®, matrix Carboxen^® 572, 20-45 mesh, bottle of 10 g

28718-U

Supelco

Tenax^® TA / Carboxen^® 1018, glass TD tube, preconditioned, O.D. × L 1/4 in. × 3 1/2 in., Sealed with (Swagelok^® End-Fittings), pkg of 10 ea

54041-U

Supelco

Carboxen^® 1000 Reversible SPE Tube, 200 mg/mL, pk 30

57914-U

Supelco

Conjunto de fibras para SPME de divinilbenzeno-carboxeno-polidimetilsiloxano (DVB/CAR/PDMS), for use with autosampler, needle size 23 ga, metal alloy fiber, fiber L 2 cm

10477-U

Supelco

Adsorvente Carboxen^®, matrix Carboxen^® 1000, 40-60 mesh, bottle of 50 g

10198

Supelco

Carbosieve Adsorbent, matrix Carbosieve G, 60-80 mesh, bottle of 5 g

10471

Supelco

Adsorvente Carboxen^®, matrix Carboxen^® 1003, 40-60 mesh, bottle of 10 g

10269

Supelco

Adsorvente Carboxen^®, matrix Carboxen^® 569, 20-45 mesh, bottle of 10 g

10189

Supelco

Carbosieve Adsorbent, matrix Carbosieve S-II, 60-80 mesh, bottle of 10 g

23446-U

Supelco

ORBO^™-93 Sorbent Tube, ORBO tube I.D. × L 6 mm × 95 mm, Bed A 180 mg, Bed B 90 mg, 60/80 mesh, pkg of 25 ea