Pular para o conteúdo
Merck

A highly efficient polysulfide mediator for lithium-sulfur batteries.

Nature communications (2015-01-07)
Xiao Liang, Connor Hart, Quan Pang, Arnd Garsuch, Thomas Weiss, Linda F Nazar
RESUMO

The lithium-sulfur battery is receiving intense interest because its theoretical energy density exceeds that of lithium-ion batteries at much lower cost, but practical applications are still hindered by capacity decay caused by the polysulfide shuttle. Here we report a strategy to entrap polysulfides in the cathode that relies on a chemical process, whereby a host--manganese dioxide nanosheets serve as the prototype--reacts with initially formed lithium polysulfides to form surface-bound intermediates. These function as a redox shuttle to catenate and bind 'higher' polysulfides, and convert them on reduction to insoluble lithium sulfide via disproportionation. The sulfur/manganese dioxide nanosheet composite with 75 wt% sulfur exhibits a reversible capacity of 1,300 mA h g(-1) at moderate rates and a fade rate over 2,000 cycles of 0.036%/cycle, among the best reported to date. We furthermore show that this mechanism extends to graphene oxide and suggest it can be employed more widely.

MATERIAIS
Número do produto
Marca
Descrição do produto

Sigma-Aldrich
Tetra-hidrofurano, inhibitor-free, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Ácido clorídrico, ACS reagent, 37%
Sigma-Aldrich
Ácido clorídrico, ACS reagent, 37%
Sigma-Aldrich
Tetra-hidrofurano, contains 250 ppm BHT as inhibitor, ACS reagent, ≥99.0%
Sigma-Aldrich
Cloreto de hidrogênio, 4.0 M in dioxane
Sigma-Aldrich
Sodium thiosulfate, ReagentPlus®, 99%
Sigma-Aldrich
Potassium permanganate, ACS reagent, ≥99.0%
Sigma-Aldrich
Ácido clorídrico, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Ácido clorídrico, 37 wt. % in H2O, 99.999% trace metals basis
Sigma-Aldrich
Ácido clorídrico, 36.5-38.0%, BioReagent, for molecular biology
Sigma-Aldrich
Ácido clorídrico, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Cloreto de hidrogênio, 2.0 M in diethyl ether
Sigma-Aldrich
Sodium thiosulfate, purum p.a., anhydrous, ≥98.0% (RT)
Sigma-Aldrich
Manganese(IV) oxide, ReagentPlus®, ≥99%
Sigma-Aldrich
Ácido clorídrico, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
Sigma-Aldrich
Tetra-hidrofurano, anhydrous, ≥99.9%, inhibitor-free
Supelco
Ácido clorídrico, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Manganese(IV) oxide, activated, ~85%, <10 μm
Sigma-Aldrich
Tetra-hidrofurano, ReagentPlus®, ≥99.0%, contains 250 ppm BHT as inhibitor
Sigma-Aldrich
Tetra-hidrofurano, contains 250 ppm BHT as inhibitor, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99.9%
Sigma-Aldrich
Sulfur, powder, 99.98% trace metals basis
Sigma-Aldrich
Tetra-hidrofurano, anhydrous, contains 250 ppm BHT as inhibitor, ≥99.9%
Sigma-Aldrich
Sulfur, 99.998% trace metals basis
Sigma-Aldrich
Super-Hydride® solution, 1.0 M lithium triethylborohydride in THF
Sigma-Aldrich
Cloreto de hidrogênio, 1.0 M in diethyl ether
Sigma-Aldrich
Potassium permanganate, ACS reagent, ≥99.0%, low in mercury
Sigma-Aldrich
Ácido clorídrico, puriss., 24.5-26.0%
Sigma-Aldrich
Potassium permanganate, ≤150 μm particle size, 97%
Sigma-Aldrich
Manganese(IV) oxide, 10 μm, reagent grade, ≥90%
Sigma-Aldrich
Sodium thiosulfate, ≥99.99% trace metals basis