Belysa can now be run on both Windows 10 and 11, as well as MacOS (beta version). They can also be downloaded from: https://www.sigmaaldrich.com/services/software-and-digital-platforms/belysa-immunoassay-curve-fitting-software/belysa-downloads
40-122
Belysa Immunoassay Curve Fitting Software
Synonim(y):
Belysa Software, Curve Fitting Tool
Zaloguj sięWyświetlanie cen organizacyjnych i kontraktowych
Wybierz wielkość
1 EACH
24 370,00 zł
24 370,00 zł
Przewidywany termin wysyłki04 lutego 2025Szczegóły
Wybierz wielkość
Zmień widok
1 EACH
24 370,00 zł
About This Item
Kod UNSPSC:
12352200
NACRES:
IB.31
24 370,00 zł
Przewidywany termin wysyłki04 lutego 2025Szczegóły
Polecane produkty
opis
analysis of data from Luminex®, ELISA and SMCxPRO®
metody
ELISA: suitable (data analysis)
Opis ogólny
Belysa allows the user to analyse the data within a .CSV output file from Luminex® (RUO Magpix, LX200, FM3D & INTELLIFLEX) multiplex immuoassay readers, the SMCxPRO® and ELISA platforms. Beginning with the application and fitting of different curve models (4PL, 5PL, Linear etc.) the software further allows the user to evaluate thier 96 or 384 well assay for deviations such as replicate %CV or the expected recovery of a standard curve. A user deffined flag system allows the user to easily ID wells that require a closer look while also giving information on the data point such as its postion with regards to the LLOQ or LOD of the assay. When happy with the individual plate a further feature allows for the comparison of multiple standard curves, either within run or between assay lots, using a slope ratio to evaluate for similarity. By allowing for the close evaluation of the single plate and multiple curves Belysa allows you to confirm that your method was reproducable time and again.
Zastosowanie
This software is used to evaluate the data from a run of 96 or 384 well immunoassay, obtained from a Luminex®, ELISA or SMCxPRO® platform, for method constistency. Software functionality inclues; Plate Map creation, Curve Fitting, %CV, %Ρecovery, result calculation and standard curve comparison.
Research Category:
Research Category:
- Milliplex®
- ELISA
- SMCxPRO®
Opakowanie
1 Box (containing two USBs)
Informacje prawne
Luminex is a registered trademark of Luminex Corp
MILLIPLEX is a registered trademark of Merck KGaA, Darmstadt, Germany
SMCxPRO is a registered trademark of Merck KGaA, Darmstadt, Germany
Ta strona może zawierać tekst przetłumaczony maszynowo.
polecane
Numer produktu
Opis
Cennik
Certyfikaty analizy (CoA)
Poszukaj Certyfikaty analizy (CoA), wpisując numer partii/serii produktów. Numery serii i partii można znaleźć na etykiecie produktu po słowach „seria” lub „partia”.
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
Powiązane treści
The newer xMAP® Sheath Fluid PLUS formulation contains 3 modes of microbial action to eliminate potential environmental microbial resistance. See how the preparations compare in this performance comparison of the previous xMAP® Sheath Fluid to the new xMAP® Sheath Fluid PLUS formulation in MILLIPLEX® multiplex assays.
Use the power of high sensitivity immunology assays with SMC® technology to precisely characterize low-abundant cytokines like those from Th1/Th2 and Th17 cells.
-
Is the Belysa software compatible with Windows and MacOS?
Is the Belysa software compatible with Windows and MacOS?
1 answer-
Helpful?
-
-
1. Why does MDD sometimes display a value when blanks haven't been defined in the plate map? LOD was N/A, but MDD showed values.
2. Do blank wells contribute to the curve fit equation, or is it only non-zero standard points?
1 answer-
1. In version 1.2.1, both LoD and MDD are interpolated from the standard curve. If the curve does not have any blanks defined, it is expected that the LoD and MDD would be non-applicable (N/A). It is important to note that the software does not designate a separate "blank" well type. Any standard well with an expected concentration of 0.0 is treated as a blank for the purposes of calculating LoD and MDD.
2. Yes, the curve fitting process does take into account blank wells. Therefore, the presence or absence of blank wells within the group will affect the curve fitting.
Helpful?
-
-
Is it possible for Belysa to perform a 4PL curve fitting with 1/Y weighting, and if so, could a brief overview be provided on the procedure to accomplish this?
1 answer-
The weighting function in the software is not customizable. It provides two weighting functions that are automatically selected based on the curve fitting formula applied. The user manual provides more detail on this topic.
Weighting
The weighting function affects how the curve fit parameters are calculated and describes how the variance changes in relation to the concentration. For most curve fit options, the weighting function used is 1/y². For Robust curve fit options, the weighting function used is 1 divided by the median value of the replicate group (or the average if 2 or fewer replicates).
Helpful?
-
-
Is there a way within the Belysa software to apply a dilution factor to every analyte at once? Also, is there a way to copy and paste a dilution factor down a column of samples within the software?
1 answer-
The best and easiest way to use sample dilutions in Belysa is to have them in the input file (.csv). So either enter into Xponent and have the sample dilutions get exported out of Xponent with your raw data or edit your .csv file to add the desired sample dilution to the end of the file where sample dilutions are kept.
Helpful?
-
Active Filters
Nasz zespół naukowców ma doświadczenie we wszystkich obszarach badań, w tym w naukach przyrodniczych, materiałoznawstwie, syntezie chemicznej, chromatografii, analityce i wielu innych dziedzinach.
Skontaktuj się z zespołem ds. pomocy technicznej
