Ugrás a tartalomra
Merck
Összes fotó(1)

Fontos dokumentumok

901670

Sigma-Aldrich

Bright electroless gold plating solution

Szinonimák:

Gold plating solution

Bejelentkezésa Szervezeti és Szerződéses árazás megtekintéséhez


About This Item

UNSPSC kód:
12352303
NACRES:
NA.23

Forma

liquid

szín

colorless

pH

7-9

Általános leírás

Bright electroless gold plating solution is formulated as a trouble-free gold plating solution designed to plate gold on metal parts by an electroless immersion process for printed circuit boards, transistor headers, electrical connectors, diode leads, lamps and other electronic parts. This process operates by the electroless displacement of base metals by gold, brought about by a difference in EMF potentials. Bright Electroless Gold is ready to use without modifications and will deposit gold on most common metals and alloys including copper, commercial brass, kovar, nickel, tin-lead solders, pure tin, iron and indium antimonide.

Alkalmazás

  • Metal parts to be plated should be thoroughly cleaned before use. The normal cleaning procedures for electroplating are adequate.
  • Bright electroless gold plating solution will show a decrease in pH with use. The pH should not be allowed to deviate from the normal conditions for plating since inferior deposits result. Adjustment of pH can be conveniently accomplished by the addition of small amounts of ammonium hydroxide to raise pH or citric acid to lower it.
  • The recommended plating temperature is 90 °C maximum for most metals. However, for tin-lead solders and pure tin, an optimum temperature of 50 °C is recommended.
Bright electroless gold plating solution can be used in the fabrication of electrical contacts in electronic devices. It can be used in the activation of aluminum alloy for complementary metal-oxide-semiconductor (CMOS) sensors. It can be electroplated on a polymeric substrate to fabricate ultra-light metallic micro-lattice materials.
Gold content: 1/3 troy ounce per gallon.

Tulajdonságok és előnyök

Features:
  • Economical gold plating
  • Plates bright gold on copper, kovar, brass, nickel, tin-lead solders and indium antimonide
  • Excellent solution stability
  • Operates with simple control of plating solution
  • Ready-to-use - no mixing required

Figyelmeztetés

Danger

Figyelmeztető mondatok

Veszélyességi osztályok

Acute Tox. 3 Dermal - Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Aquatic Acute 1 - Aquatic Chronic 2 - Eye Dam. 1 - Skin Corr. 1B - STOT SE 3

Célzott szervek

Respiratory system

Tárolási osztály kódja

6.1B - Non-combustible acute toxic Cat. 1 and 2 / very toxic hazardous materials

WGK

WGK 2

Lobbanási pont (F)

Not applicable

Lobbanási pont (C)

Not applicable


Válasszon a legfrissebb verziók közül:

Analitikai tanúsítványok (COA)

Lot/Batch Number

Nem találja a megfelelő verziót?

Ha egy adott verzióra van szüksége, a tétel- vagy cikkszám alapján rákereshet egy adott tanúsítványra.

Már rendelkezik ezzel a termékkel?

Az Ön által nemrégiben megvásárolt termékekre vonatkozó dokumentumokat a Dokumentumtárban találja.

Dokumentumtár megtekintése

Electroless gold plating on aluminum patterned chips for CMOS-based sensor applications
Ko JW, et al.
Journal of the Electrochemical Society, 157(1), D46-D46 (2009)
Development of new electrolytic and electroless gold plating processes for electronics applications
Osaka T, et al.
Science and Technology of Advanced Materials, 7(5), 425-437 (2006)
A simple, highly efficient route to electroless gold plating on complex 3D printed polyacrylate plastics
Kim SH, et al.
Chemical Communications (Cambridge, England), 54(74), 10463-10466 (2018)

Tudóscsoportunk valamennyi kutatási területen rendelkezik tapasztalattal, beleértve az élettudományt, az anyagtudományt, a kémiai szintézist, a kromatográfiát, az analitikát és még sok más területet.

Lépjen kapcsolatba a szaktanácsadással