Ugrás a tartalomra
Merck

576352

Sigma-Aldrich

Indium tin oxide coated glass slide, rectangular

surface resistivity 70-100 Ω/sq, slide

Szinonimák:

ITO, ITO coated slide, rectangular

Bejelentkezésa Szervezeti és Szerződéses árazás megtekintéséhez


About This Item

Lineáris képlet:
In2O3 · (SnO2)x
CAS-szám:
MDL-szám:
UNSPSC kód:
12352103
PubChem Substance ID:
NACRES:
NA.23

Minőségi szint

fajlagos felületi ellenállás

70-100 Ω/sq

H × Sz × vastagság

75 mm × 25 mm × 1.1 mm

áteresztőképesség

>87%

törésmutató

n20/D 1.517 (lit.)

SMILES string

O=[Sn]=O.O=[In]O[In]=O

InChI

1S/2In.5O.Sn

Nemzetközi kémiai azonosító kulcs

LNNWKAUHKIHCKO-UHFFFAOYSA-N

Looking for similar products? Látogasson el ide Útmutató a termékösszehasonlításhoz

Általános leírás

Indium tin oxide (ITO) is widely used as transparent conducting oxides. Its major characteristics are electrical conductivity, optical transparency and the ease to be deposited as films.

Alkalmazás

ITO cover slides may be used for closed digital microfluidic devices and as a transparent electrodes in display and other optoelectronic devices. Some other potential uses that have been reported are:
  • Eumelanin samples prepared on ITO covered glass substrates.
  • Interface windows of the liquid cell for optical beam deflection (OBD) sensing contain a 20-nm-thick indium tin oxide film.
  • Mesoporous TiO2 films were formed on ITO conductive glass substrates.

Fizikai tulajdonságok

Thickness of ITO coating is 150-300 Å.
Resistance may increase to as high as 375 Ω when exposed to temperatures of 300 °C for 30 minutes or more.

To avoid damaging the thin film coating when determining which side is coated, lightly touch the barrelsof the probes to the same surface of a single-side coated product. Testing the alternate side will quicklyshow one with a low resistance as compared to the opposing side, which will exhibit an essentially infiniteresistance.

Tárolási osztály kódja

13 - Non Combustible Solids

WGK

WGK 3

Lobbanási pont (F)

Not applicable

Lobbanási pont (C)

Not applicable

Egyéni védőeszköz

dust mask type N95 (US), Eyeshields, Gloves


Válasszon a legfrissebb verziók közül:

Analitikai tanúsítványok (COA)

Lot/Batch Number

Nem találja a megfelelő verziót?

Ha egy adott verzióra van szüksége, a tétel- vagy cikkszám alapján rákereshet egy adott tanúsítványra.

Már rendelkezik ezzel a termékkel?

Az Ön által nemrégiben megvásárolt termékekre vonatkozó dokumentumokat a Dokumentumtárban találja.

Dokumentumtár megtekintése

Online coupling of digital microfluidic devices with mass spectrometry detection using an eductor with electrospray ionization.
Baker CA and Roper MG
Analytical Chemistry, 2955-2960 (2012)
High-resolution frequency-modulation atomic force microscopy in liquids using electrostatic excitation method.
Umeda K, et al.
Applied Physics Express, 3(6), 065205-065205 (2010)
Andreas Herrmann et al.
Chemistry (Weinheim an der Bergstrasse, Germany), 15(1), 117-124 (2008-12-17)
Application of an electric field to liquid crystalline film forming imines with negative dielectric anisotropy, such as N-(4-methoxybenzylidene)-4-butylaniline (MBBA, 1), results in the expulsion of compounds that do not participate in the formation of the liquid crystalline phase. Furthermore, amines
Preparation of non-annealed anatase TiO< sub> 2</sub> film on ITO substrate by anodizing in hot phosphate/glycerol electrolyte for dye-sensitized solar cells.
Tsuji E, et al.
Materials Letters, 91, 39-41 (2013)
Optical Fiber Refractometers based on Indium Tin Oxide Coatings with Response in the Visible Spectral Region
Zamarreno CR, et al.
Procedia Engineering, 25, 499-502 (2011)

Cikkek

Organic Semiconductor Laser Materials

Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.

A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.

Progress in solution-processed functional materials leads to thin-film optoelectronic devices for industrial and consumer electronics.

Protocols

Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.

Tudóscsoportunk valamennyi kutatási területen rendelkezik tapasztalattal, beleértve az élettudományt, az anyagtudományt, a kémiai szintézist, a kromatográfiát, az analitikát és még sok más területet.

Lépjen kapcsolatba a szaktanácsadással