Przejdź do zawartości
Merck

Applications of Trametes versicolor crude culture filtrates in detoxification of biomass pretreatment hydrolyzates.

Bioresource technology (2015-04-16)
Rajeev Kumar Kapoor, Kalavathy Rajan, Danielle Julie Carrier
ABSTRAKT

Laccases have wide range of substrate specificity and find applications from pulp industry to waste water remediation. Laccases have also been used in combined pretreatment of biomass hydrolyzates to remove enzymatic and fermentation inhibitors. In this study, laccase production by Trametes versicolor strains isolated from different regions of the United States was induced using copper salts. T. versicolor crude culture filtrates (CCF), without any purification step, were tested for removal of model inhibitor compounds as well as in poplar and rice straw pretreatment hydrolyzates. Phenolic inhibitors were removed by 76% and 94% from the dilute acid hydrolyzates of rice straw and poplar, respectively, when incubated with the CCF for 12h, at room temperature. Xylo-oligosaccharide concentrations present in rice straw hydrolyzates were reduced by 64% when incubated with T. versicolor CCF. T. versicolor CCF could be a low cost technology for decreasing enzymatic and fermentation inhibitors.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Sigma-Aldrich
Trizma® base, anhydrous, free-flowing, Redi-Dri, ≥99.9%
Sigma-Aldrich
Guaiacol, oxidation indicator
Sigma-Aldrich
Trizma® base, Primary Standard and Buffer, ≥99.9% (titration), crystalline
Sigma-Aldrich
Salicylic acid, suitable for plant cell culture
Sigma-Aldrich
Trizma® base, BioPerformance Certified, meets EP, USP testing specifications, suitable for cell culture, ≥99.9% (titration)
Sigma-Aldrich
p-Coumaric acid, ≥98.0% (HPLC)
Sigma-Aldrich
Salicylic acid, BioXtra, ≥99.0%
Sigma-Aldrich
Tromethamine, meets USP testing specifications
Sigma-Aldrich
Trizma® base, ≥99.9% (titration), crystalline
Sigma-Aldrich
Trizma® base, BioXtra, pH 10.5-12.0 (1 M in H2O), ≥99.9% (titration)
Sigma-Aldrich
Salicylic acid, puriss. p.a., ≥99.0% (T)
Sigma-Aldrich
Salicylic acid, meets analytical specification of Ph. Eur., BP, USP, 99.5-100.5% (calc. to the dried substance)
Sigma-Aldrich
Salicylic acid, ReagentPlus®, ≥99%
Sigma-Aldrich
5-Hydroxymethyl-2-furaldehyde, 99%
Sigma-Aldrich
Trizma® base, ≥99.0% (T)
Sigma-Aldrich
Trizma® base, BioUltra, for molecular biology, ≥99.8% (T)
Sigma-Aldrich
Trizma® base, puriss. p.a., ≥99.7% (T)
Sigma-Aldrich
Vanillin, natural, ≥97%, FCC, FG
Sigma-Aldrich
Vanillin, ReagentPlus®, 99%
Sigma-Aldrich
Tris(hydroxymethyl)aminomethane, ACS reagent, ≥99.8%
Sigma-Aldrich
Salicylic acid, ≥99%, FG
Sigma-Aldrich
Vanillic acid, ≥97%, FG
Sigma-Aldrich
Guaiacol, natural, ≥99%, FG
Sigma-Aldrich
Copper(II) sulfate, anhydrous, powder, ≥99.99% trace metals basis
Sigma-Aldrich
5-(Hydroxymethyl)furfural, ≥99%, FG
Sigma-Aldrich
Vanillic acid, 97%
Sigma-Aldrich
Salicylic acid, ACS reagent, ≥99.0%
Supelco
Salicylic acid, 1.0 mg/mL in acetonitrile, ampule of 1 mL, certified reference material, Cerilliant®
Sigma-Aldrich
Vanillin, ≥97%, FCC, FG
Sigma-Aldrich
Glycerol solution, 83.5-89.5% (T)