Przejdź do zawartości
Merck

475629

Sigma-Aldrich

Poly(ethylene glycol) diacrylate

average Mn 250, acrylate, 100 ppm MEHQ as inhibitor

Synonim(y):

Glikol polietylenowy

Zaloguj sięWyświetlanie cen organizacyjnych i kontraktowych

Wybierz wielkość

100 ML
368,00 zł
500 ML
655,00 zł

368,00 zł


Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności

Poproś o zamówienie zbiorcze

Wybierz wielkość

Zmień widok
100 ML
368,00 zł
500 ML
655,00 zł

About This Item

Numer CAS:
Numer MDL:
Kod UNSPSC:
12162002
Identyfikator substancji w PubChem:
NACRES:
NA.23

368,00 zł


Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności

Poproś o zamówienie zbiorcze

Nazwa produktu

Poly(ethylene glycol) diacrylate, average Mn 250

masa cząsteczkowa

average Mn 250

Poziom jakości

zawiera

100 ppm MEHQ as inhibitor

przydatność reakcji

reagent type: cross-linking reagent
reaction type: Polymerization Reactions

współczynnik refrakcji

n20/D 1.463

gęstość

1.11 g/mL at 25 °C

Ω-koniec

acrylate

α-koniec

acrylate

architektura polimerowa

shape: linear
functionality: homobifunctional

temp. przechowywania

2-8°C

ciąg SMILES

OCCO.OC(=O)C=C

InChI

1S/C8H10O4/c1-3-7(9)11-5-6-12-8(10)4-2/h3-4H,1-2,5-6H2

Klucz InChI

KUDUQBURMYMBIJ-UHFFFAOYSA-N

Szukasz podobnych produktów? Odwiedź Przewodnik dotyczący porównywania produktów

Opis ogólny

Poly(ethylene glycol) diacrylate (PEGDA) is a polyethylene glycol (PEG) based material that can be used for a variety of tissue engineering and drug delivery based applications. It is majorly used as a prepolymer solution that can be used in the formation of a cross-linked polymeric system.[1][2]

Zastosowanie

PEGDA can be used in the formation of a UV-cured membrane for potential usage in the separation of carbon dioxide (CO2) based gases.[3] It may also be used in the development of novel injectable biodegradable polymers for a variety of biomedical applications.[4]
Ta strona może zawierać tekst przetłumaczony maszynowo.

Piktogramy

CorrosionExclamation mark

Hasło ostrzegawcze

Danger

Zwroty wskazujące rodzaj zagrożenia

Zwroty wskazujące środki ostrożności

Klasyfikacja zagrożeń

Eye Dam. 1 - Skin Irrit. 2 - Skin Sens. 1

Kod klasy składowania

10 - Combustible liquids

Klasa zagrożenia wodnego (WGK)

WGK 1

Środki ochrony indywidualnej

Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter


Wybierz jedną z najnowszych wersji:

Certyfikaty analizy (CoA)

Lot/Batch Number

Nie widzisz odpowiedniej wersji?

Jeśli potrzebujesz konkretnej wersji, możesz wyszukać konkretny certyfikat według numeru partii lub serii.

Masz już ten produkt?

Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.

Odwiedź Bibliotekę dokumentów

Multifunctional thiols as additives in UV-cured PEG-diacrylate membranes for CO2 separation
Kwisnek L, et al.
Journal of Membrane Science , 369(1-2), 429-436 (2011)
Injectable biodegradable polymer composites based on poly (propylene fumarate) crosslinked with poly (ethylene glycol)-dimethacrylate
He S, et al.
Biomaterials, 21(23), 2389-2394 (2000)
Preparation and characterization of crosslinked poly (ethylene glycol) diacrylate hydrogels as fouling-resistant membrane coating materials
Ju H, et al.
Journal of Membrane Science , 330(1-2), 180-188 (2009)
Dibakar Mondal et al.
Journal of the mechanical behavior of biomedical materials, 104, 103653-103653 (2020-03-17)
In this study, single filaments of acrylated epoxidized soybean oil (AESO)/polyethylene glycol diacrylate (PEGDA)/nanohydroxyapatite (nHA)-based nanocomposites intended for bone defect repair have displayed significant improvement of their mechanical properties when extruded through smaller needle gauges before UV curing. These nanocomposite
Release of protein from highly cross-linked hydrogels of poly (ethylene glycol) diacrylate fabricated by UV polymerization
Mellott MB, et al.
Biomaterials, 22(9), 929-941 (2001)

Produkty

Scaffold patterning with poly(ethylene glycol)-based hydrogels for cell presence in 2D and 3D environments on photoactive substrates.

Progress in biotechnology fields such as tissue engineering and drug delivery is accompanied by an increasing demand for diverse functional biomaterials. One class of biomaterials that has been the subject of intense research interest is hydrogels, because they closely mimic the natural environment of cells, both chemically and physically and therefore can be used as support to grow cells. This article specifically discusses poly(ethylene glycol) (PEG) hydrogels, which are good for biological applications because they do not generally elicit an immune response. PEGs offer a readily available, easy to modify polymer for widespread use in hydrogel fabrication, including 2D and 3D scaffold for tissue culture. The degradable linkages also enable a variety of applications for release of therapeutic agents.

Designing biomaterial scaffolds mimicking complex living tissue structures is crucial for tissue engineering and regenerative medicine advancements.

Questions

1–2 of 2 Questions  
  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nasz zespół naukowców ma doświadczenie we wszystkich obszarach badań, w tym w naukach przyrodniczych, materiałoznawstwie, syntezie chemicznej, chromatografii, analityce i wielu innych dziedzinach.

Skontaktuj się z zespołem ds. pomocy technicznej