S4762-5 mg consists of 5 mg of the Streptavidin protein, and with overpack, it amounts to 5.24MG protein. The protein assay, conducted by a proprietary method developed by Sigma, is performed to assess whether the product has been adequately isolated and the subsequent affinity purification process has yielded at least 65% Streptavidin. For this product, solubility above 1 mg/mL is not tested, and the QC testing is carried out at 1 mg/mL. The solubility time is typically not recorded, but generally, this product dissolves in a few minutes.
S4762
ストレプトアビジン from Streptomyces avidinii
Streptavidin from Streptomyces avidinii
essentially salt-free, lyophilized powder, ≥13 units/mg protein
ログイン組織・契約価格を表示する
サイズを選択してください
0.1 MG
￥7,940
0.5 MG
￥19,700
1 MG
￥36,600
5 MG
￥115,000
10 MG
￥192,000
すべての画像(2)
サイズを選択してください
表示を変更する
0.1 MG
￥7,940
0.5 MG
￥19,700
1 MG
￥36,600
5 MG
￥115,000
10 MG
￥192,000
About This Item
おすすめの製品
詳細
アプリケーション
調製ノート
アフィニティ-精製品。
免責事項
製品に同封された当社のカタログまたは他社の文書で特記しない限り、当社製品は研究専用であり、他の目的で使用することを意図したものではありません。他の目的には、無許可の商業的使用、in vitro診断への使用、ex vivoまたはin vivo治療への使用、またはすべての種類のヒトまたは動物への消費および使用が含まれますが、これに限定されません。
保管分類コード
11 - Combustible Solids
WGK
WGK 3
引火点(°F)
Not applicable
引火点(℃)
Not applicable
個人用保護具 (PPE)
Eyeshields, Gloves, type N95 (US)
適用法令
試験研究用途を考慮した関連法令を主に挙げております。化学物質以外については、一部の情報のみ提供しています。 製品を安全かつ合法的に使用することは、使用者の義務です。最新情報により修正される場合があります。WEBの反映には時間を要することがあるため、適宜SDSをご参照ください。
Jan Code
S4762PROC:
S4762-BULK:
S4762-1MG:
S4762-5MG-PW:
S4762-.1MG-PW:
S4762-5MG:
S4762-10MG-PW:
S4762-VAR:
S4762-.5MG-PW:
S4762-.1MG:
S4762-10MG:
S4762-.5MG:
S4762-PH:
S4762-1MG-PW:
最新バージョンのいずれかを選択してください：
試験成績書（COA）
Lot/Batch Number
この製品を見ている人はこちらもチェック
Biotinylated CdSe/ZnSe nanocrystals for specific fluorescent labeling.
Charvet N et al
Journal of Materials Chemistry, 14.17 , 2638-2642 (2004)
Viability of endothelial cells after ultrasound-mediated sonoporation: Influence of targeting, oscillation, and displacement of microbubbles
van R T, et al.
Journal of Controlled Release : Official Journal of the Controlled Release Society, 238, 197-211 (2016)
Isolation and properties of streptavidin.
E A Bayer et al.
Methods in enzymology, 184, 80-89 (1990-01-01)
Timo Vögtle et al.
eLife, 8 (2019-08-23)
The immunoreceptor tyrosine-based inhibition motif (ITIM)-containing receptor G6b-B is critical for platelet production and activation. Loss of G6b-B results in severe macrothrombocytopenia, myelofibrosis and aberrant platelet function in mice and humans. Using a combination of immunohistochemistry, affinity chromatography and proteomics
A rapid streptavidin-capture ELISA specific for the detection of antibodies to feline foamy virus.
Winkler IG et al
Journal of Immunological Methods, 207(1), 69-77 (1997)
-
Does S472-5MG contain 5 mg of Streptavidin alone, or does it also include other materials? What does the %protein test within the CoA involve, and why is there a range of acceptance values? Also, how long is Streptavidin allowed to solubilize when preparing the 1mg/mL for the solubility quality test?
1 回答-
役に立ちましたか？
-
-
Is there a protocol for diluting the streptavidin S4762? For biotin-antibody assays, what solvent is typically used—DI water or 1X PBS? The documentation mentions, "Reconstitute in H₂O or 1 mM NaHCO₃, pH 9.0 at twice the final concentration and then dilute with an equal volume of 2X buffer." If diluted with H₂O, should 2X buffer still be used? Also, what does 2X buffer mean? Is it an SDS buffer?
1 回答-
Streptavidin S4762 can be reconstituted in H₂O or 1 mM NaHCO₃ at twice the final concentration and then diluted with an equal volume of 2X buffer. For biotin-antibody assays, it is typical to use 1X PBS as the solvent. When diluted with H₂O, 2X buffer should still be used. The term "2X buffer" refers to the buffer being used at double the normal strength and does not specifically refer to an SDS buffer.
役に立ちましたか？
-
-
how can streptavidin bond on nc membrane?
1 回答-
This product binds to Biotin. FAs mentioned on the Certificate of Analysis : Streptavidin ≥ 18 U/mgP in one lot. One unit will bind 1.0 ug biotin. According to the method described by: Green N.M., Methods in Enzymology, 18, 418 (1970).
Additionally, the following information below may be helpful: https://www.researchgate.net/post/How-could-streptavidin-bind-tightly-to-the-nitrocellulose-membrane-without-using-biotin
役に立ちましたか？
-
-
Why this diferent between https://www.sigmaaldrich.com/NL/en/product/sigma/s4762 and https://www.sigmaaldrich.com/NL/en/product/sigma/s0677.
1 回答-
The major difference between product S4762 and S0677 is that product S4762, is not a recombinant and is essentially salt-free while product S0677 is recombinant, expressed in E. coli.
For product S4762, commercial preparations of streptavidin were analyzed by isoelectric focusing combined with an affinity-based protein blot using biotinylated, protein-saturated nitrocellulose. This product has an approximated molecular weight equal to 60,000 kDa. Dependent on the preparation, seven to sixteen streptavidin forms were found with isoelectric points ranging from 5 to 8.
For product S0677, the protein is free of carbohydrate. The four subunits consisting of molecular weight of approx. 13,000 Da, each containing a single biotin-binding site. Each subunit has six tyrosine residues. The recombinant streptavidin from E. coli is the natural protein. There have been no deletions or additions. It is unknown if the protein for this product has the N-terminal methionine that is often found in recombinant proteins produced in E. coli.
It appears the recombinant Streptavidin starts at amino acid residue 16-133 (with a mutation at residue 120)役に立ちましたか？
-
-
In what is Product No. S4762 soluble? And how do you recommend storing solutions of streptavidin?
1 回答-
This product is soluble in water or aqueous buffer (i.e., PBS) at 1 mg/mL. Solutions in PBS or water can be stored for several months at 4°C, or for more than a year as frozen aliquots.
役に立ちましたか？
-
-
What is the affinity of streptavidin (e.g., Product No. S4762) for biotin?
1 回答-
Streptavidin binds the small molecule biotin with extraordinary affinity. The dissociation constant is KD = 4 × 10-14 M, according to N. M. Green, Methods Enzymol., 184, 51 (1990).
役に立ちましたか？
-
-
How do I determine how many units are in a particular amount of Product No. S4762?
1 回答-
On the Certificate of Analysis for the product, the activity of the product per milligram can be found. This number is specific for your lot, and you must look up the Certificate of Analysis by the lot number for your particular batch of product. From this number, you can calculate how many units are in a particular weight of your product by multiplying the weight of the product by the units/mg of the product.
役に立ちましたか？
-
-
What is the expiration date of the Product No. S4762 in my possession?
1 回答-
Product No. S4762 has not been assigned an expiration date by Sigma. Streptavidin is stable. S4762 has been assigned a QC Release date as well was a Retest Date. These dates can be found on the Certificate of Analysis. The QC Release Date indicates the last date that the lot was tested and found to meet specifications, and the Retest Date indicates the next date that the lot will be tested, assuming that enough of the lot remains to perform the testing.
役に立ちましたか？
-
-
What is the Department of Transportation shipping information for this product?
1 回答-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
役に立ちましたか？
-
アクティブなフィルタ
ライフサイエンス、有機合成、材料科学、クロマトグラフィー、分析など、あらゆる分野の研究に経験のあるメンバーがおります。.
製品に関するお問い合わせはこちら（テクニカルサービス）
