Pular para o conteúdo
Merck
  • Heavy Metal Contents and Physical Parameters of Aegiceras corniculatum, Brassica juncea, and Litchi chinensis Honeys from Bangladesh.

Heavy Metal Contents and Physical Parameters of Aegiceras corniculatum, Brassica juncea, and Litchi chinensis Honeys from Bangladesh.

BioMed research international (2015-12-01)
Nandita Sarker, Muhammed Alamgir Zaman Chowdhury, Abu Naieum Muhammad Fakhruddin, Zeenath Fardous, Mohammed Moniruzzaman, Siew Hua Gan
RESUMO

The present study was undertaken to determine the heavy metal levels and the physicochemical parameters (pH, electrical conductivity (EC), and ash, moisture, and total sugar content) of honeys from Bangladesh. Three different floral honeys were investigated, namely, khalsi (Aegiceras corniculatum), mustard (Brassica juncea), and litchi (Litchi chinensis) honeys. The heavy metals in the honeys were determined by using a High Temperature Dry Oxidation method followed by Atomic Absorption Spectroscopy. The mean pH, EC, and ash, moisture, and total sugar contents of the investigated honeys were 3.6, 0.51 mS/cm, 0.18%, 18.83%, and 68.30%, respectively. Iron was the most abundant among all the investigated heavy metals, ranging from 13.51 to 15.44 mg/kg. The mean concentrations of Mn and Zn in the investigated honeys were 0.28 mg/kg and 2.99 mg/kg, respectively. Cd was below the detection limit, and lead was found in some honey samples, but their contents were below the recommended Maximum Acceptable Level. Cr was also found in all of the samples, but its concentration was within the limit. The physicochemical analysis of the honey samples yielded levels within the limits set by the international honey legislation, indicating that the honey samples were of good quality and had acceptable values for maturity, purity, and freshness.

MATERIAIS
Número do produto
Marca
Descrição do produto

Sigma-Aldrich
Ácido clorídrico, ACS reagent, 37%
Sigma-Aldrich
Ácido sulfúrico, ACS reagent, 95.0-98.0%
Sigma-Aldrich
Ácido nítrico, ACS reagent, 70%
Sigma-Aldrich
Ácido clorídrico, ACS reagent, 37%
Sigma-Aldrich
Cloreto de hidrogênio, 4.0 M in dioxane
Sigma-Aldrich
Ácido nítrico, 70%, purified by redistillation, ≥99.999% trace metals basis
Sigma-Aldrich
Ácido clorídrico, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Ácido sulfúrico, 99.999%
Sigma-Aldrich
Ácido clorídrico, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
Sigma-Aldrich
Ácido clorídrico, 37 wt. % in H2O, 99.999% trace metals basis
Sigma-Aldrich
Ácido clorídrico, 36.5-38.0%, BioReagent, for molecular biology
Sigma-Aldrich
Ácido nítrico, puriss. p.a., 65.0-67.0%
Sigma-Aldrich
Cloreto de hidrogênio, 2.0 M in diethyl ether
Sigma-Aldrich
Ácido clorídrico, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Ácido sulfúrico, puriss. p.a., for determination of Hg, ACS reagent, reag. ISO, reag. Ph. Eur., 95.0-97.0%
Supelco
Ácido clorídrico, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Peróxido de hidrogênio, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Cloreto de hidrogênio, 1.0 M in diethyl ether
Sigma-Aldrich
Peróxido de hidrogênio, purum p.a., ≥35% (RT)
Sigma-Aldrich
Ácido clorídrico, puriss., 24.5-26.0%
Sigma-Aldrich
Ácido nítrico, puriss. p.a., ≥65% (T)
Sigma-Aldrich
Ácido sulfúrico, puriss., meets analytical specification of Ph. Eur., BP, 95-97%
Sigma-Aldrich
Ácido clorídrico, ~6 M in H2O, for amino acid analysis
Sigma-Aldrich
Ácido sulfúrico, puriss. p.a., ≥25% (T)
Sigma-Aldrich
Cloreto de hidrogênio, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
Ácido clorídrico, 32 wt. % in H2O, FCC
Sigma-Aldrich
Cloreto de hidrogênio, 1.0 M in acetic acid
Sigma-Aldrich
Ácido nítrico, ACS reagent, ≥90.0%
Sigma-Aldrich
Nitric-14N acid solution, ~10 N in H2O, 99.99 atom % 14N