Direkt zum Inhalt
Merck
  • Simultaneous analysis of basic, acidic and neutral compounds on an endcapped octadecylsilane silica-based monolith by pressure-assisted capillary electrochromatography.

Simultaneous analysis of basic, acidic and neutral compounds on an endcapped octadecylsilane silica-based monolith by pressure-assisted capillary electrochromatography.

Electrophoresis (2008-01-24)
Tong Zhang, Ibrahim Khadra, Melvin R Euerby, Graham G Skellern, David G Watson, Justice N A Tettey
ZUSAMMENFASSUNG

This simultaneous separation of basic, acidic and neutral analytes by pressure-assisted CEC (pCEC) using a hybrid (tetramethoxysilane and methyltrimethoxysilane) silica-based monolith, chemically modified with octadecyldimethylchlorosilane followed by endcapping with hexamethyldisilazane is described. The endcapping resulted in near Gaussian peaks for highly basic analytes such as nortriptyline without a significant loss in the EOF. The migration behaviour of analytes on this phase could be rationalised based on hydrophobicity, electrophoretic mobility and ion-exchange interactions. The high porosity of the monolith allowed manipulation of the linear velocity of mobile phases by the addition of varying amounts of pressure at the inlet to reduce analysis times and overcome the reversed migration of anionic species towards the detection window in cathodic EOF mode. The concomitant programmed application of pressure (2-4 bar) and voltage (27 kV) facilitated the simultaneous separation of four cationic, four neutral and two anionic compounds in 6 min with efficiencies ranging from 41 000 to 94 000, 57 000 to 77 000 and 180 000 to 210 000 theoretical plates/metre, respectively. The % RSD values of migration times and efficiencies in pCEC mode were less than 3.6 and 7.9%, respectively (n = 5).

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 1.0 M in THF
Sigma-Aldrich
Hexamethyldisilazan, reagent grade, ≥99%
Sigma-Aldrich
Natrium-bis(trimethylsilyl)amid -Lösung, 1.0 M in THF
Sigma-Aldrich
Kalium-bis(trimethylsilyl)amid -Lösung, 1 M in THF
Sigma-Aldrich
Hexamethyldisilazan, ReagentPlus®, 99.9%
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid, 97%
Sigma-Aldrich
Kalium-bis(trimethylsilyl)amid, 95%
Sigma-Aldrich
Trimethoxymethylsilan, 98%
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 1 M in toluene
Sigma-Aldrich
Natrium-bis(trimethylsilyl)amid, 95%
Sigma-Aldrich
Kalium-bis(trimethylsilyl)amid -Lösung, 0.5 M in toluene
Sigma-Aldrich
Tetramethylorthosilikat, 98%
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 1.5 M in THF
Sigma-Aldrich
Trimethoxymethylsilan, 95%
Sigma-Aldrich
Tetramethylorthosilikat, ≥99%
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 1.0 M in hexanes
Sigma-Aldrich
Natrium-bis(trimethylsilyl)amid -Lösung, 40% in THF
Sigma-Aldrich
Octadecylsilan, 97%
Supelco
Hexamethyldisilazan, for GC derivatization, LiChropur, ≥99.0% (GC)
Sigma-Aldrich
Natrium-bis(trimethylsilyl)amid -Lösung, 0.6 M in toluene
Sigma-Aldrich
Tris[N,N-bis(trimethylsilyl)amid]yttrium
Sigma-Aldrich
Hexamethyldisilazan, produced by Wacker Chemie AG, Burghausen, Germany, ≥97.0% (GC)
Sigma-Aldrich
Kalium-bis(trimethylsilyl)amid -Lösung, 1.0 M in 2-methyltetrahydrofuran
Sigma-Aldrich
Trimethoxymethylsilan, purum, ≥98.0% (GC)
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 1 M in tert-butyl methyl ether
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 0.5 M in 2-methyltetrahydrofuran
Sigma-Aldrich
Tris[N,N-bis(trimethylsilyl)amid]samarium(III), 98%
Sigma-Aldrich
Tetramethylorthosilikat, purum, ≥98.0% (GC)