The synthesis method is proprietary. Further, the QC data is not available for this product at the M-Clarity level. Zinc oxide is doped with aluminum oxide (5-7% by mass) to stabilize the zinc oxide and prevent unwanted changes to the material. Particle size, XRD, and XPS are tested. Information regarding these tests is available on the lot-specific Certificates of Analysis, examples of which can be found in the documentation section of the product page on the website.
Wszystkie zdjęcia(2)
Kluczowe dokumenty
677450
Zinc oxide
nanopowder, <50 nm particle size (BET), >97%
Synonim(y):
Cynk biały, Tlenek cynku
Zaloguj sięWyświetlanie cen organizacyjnych i kontraktowych
Wybierz wielkość
5 G
311,00 zł
311,00 zł
Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności
Poproś o zamówienie zbiorcze
Wybierz wielkość
Zmień widok
5 G
311,00 zł
About This Item
Wzór liniowy:
ZnO
Numer CAS:
Masa cząsteczkowa:
81.39
Numer MDL:
Kod UNSPSC:
12352302
Identyfikator substancji w PubChem:
NACRES:
NA.23
311,00 zł
Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności
Poproś o zamówienie zbiorcze
Polecane produkty
Poziom jakości
Próba
>97%
Formularz
nanopowder
zawiera
6% Al as dopant
przydatność reakcji
reagent type: catalyst
core: zinc
powierzchnia
>10.8 m2/g
wielkość cząstki
<50 nm (BET)
ciąg SMILES
O=[Zn]
InChI
1S/O.Zn
Klucz InChI
XLOMVQKBTHCTTD-UHFFFAOYSA-N
Szukasz podobnych produktów? Odwiedź Przewodnik dotyczący porównywania produktów
Zastosowanie
Employed in the preparation of NaZnSiO3OH, a novel chiral framework material which has potential application in ion exchange, adsorption or catalysis.
Informacje prawne
Product of Engi-Mat Co.
Ta strona może zawierać tekst przetłumaczony maszynowo.
Hasło ostrzegawcze
Warning
Zwroty wskazujące rodzaj zagrożenia
Zwroty wskazujące środki ostrożności
Klasyfikacja zagrożeń
Aquatic Acute 1 - Aquatic Chronic 1
Kod klasy składowania
13 - Non Combustible Solids
Klasa zagrożenia wodnego (WGK)
WGK 2
Temperatura zapłonu (°F)
Not applicable
Temperatura zapłonu (°C)
Not applicable
Środki ochrony indywidualnej
dust mask type N95 (US), Gloves
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
Klienci oglądali również te produkty
Transparent Semiconducting ZnO:Al Thin Films Prepared by Spray Pyrolysis
W. T. Seeber, et al
Materials Science in Semiconductor Processing, 2, 45-55 (1999)
"Nanopowder synthesis of zinc oxide via solochemical processing.
Vaezi MR and Sadrnezhaad SK
Materials & Design, 28(2), 515-519 (2007)
Effect of Microstructural Control on Thermoelectric Properties of Hot-Pressed Aluminum-Doped Zinc Oxide
Y. Fujishiro, etal.
Journal of the American Ceramic Society. American Ceramic Society, 86, 2063-2066 (2003)
Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer.
Hau S, et al.
Applied Physics Letters, 92(25), 253301-253301 (2008)
Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer.
Beek WJE, et al.
Advanced Materials, 16(12), 1009-1013 (2004)
Produkty
Operation principle and market dominance of single crystalline silicon solar cells.
Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.
Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.
Among various ceramics, one-dimensional (1-D) piezoelectric ceramics have attracted significant scientific attention for use in energy harvesting.
-
Could I know the synthesis method? FTiR ? XPS? How are they stabilized? XRD? BET?
1 answer-
Helpful?
-
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 answer-
Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
Helpful?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 answer-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfHelpful?
-
Active Filters
Nasz zespół naukowców ma doświadczenie we wszystkich obszarach badań, w tym w naukach przyrodniczych, materiałoznawstwie, syntezie chemicznej, chromatografii, analityce i wielu innych dziedzinach.
Skontaktuj się z zespołem ds. pomocy technicznej
