製品901973は現在お客様の国では販売されていません。 製品に関するお問い合わせはこちら（テクニカルサービス）
おすすめの製品
詳細
Breakdown Voltage (DC): 3100 V/mil
Max. Service Temp.: 175°C
Specific Gravity: 1.26-1.27
Theoretical Coverage: 32-35 m2/kg/mil
Volume Resistivity: >1014 ohm.cm
フォーム
liquid
色
green
粘度
20-30 poise (Brookfield CAP @25 °C)
保管温度
2-8°C
詳細
DSU4606G is a flexible, green UV curing dielectric designed to be screen printed as an insulating layer for crossovers in membrane switches and a variety of electronic & Printed circuitry constructions.
DSU4606G has excellent adhesion to both treated and untreated PET. It also adheres to a variety of substrates including PC, PI, glass, and ITO.
DSU4606G has excellent adhesion to both treated and untreated PET. It also adheres to a variety of substrates including PC, PI, glass, and ITO.
Drying/Curing
DSU4606G can be cured with a 200-300 Watt/inch (80-120 Watt/cm) medium-pressure Mercury vapor arc lamps, or microwave initiated D-bulb equivalents. Optimum UV dosage should be around 650 mJ/cm2.
DSU4606G can be cured with a 200-300 Watt/inch (80-120 Watt/cm) medium-pressure Mercury vapor arc lamps, or microwave initiated D-bulb equivalents. Optimum UV dosage should be around 650 mJ/cm2.
Typical Cured Deposits:
196 threads/inch (77 threads/cm): 0.6-0.8 mil
305 threads/inch (120 threads/cm): 0.3-0.5 mil
DSU4606G must be shielded from sunlight or high-intensity light to prevent on-screen curing during prolonged production stoppages.
Cleaning with thinner followed by cleaning with acetone is recommended
196 threads/inch (77 threads/cm): 0.6-0.8 mil
305 threads/inch (120 threads/cm): 0.3-0.5 mil
DSU4606G must be shielded from sunlight or high-intensity light to prevent on-screen curing during prolonged production stoppages.
Cleaning with thinner followed by cleaning with acetone is recommended
アプリケーション
DSU4606G is supplied ready for use, but should be lightly stirred before use. It should not require reducing.
DSU4606G is suitable for use on hand; semi-automatic or fully automatic screen printing machines. Polyester or Stainless screens with mesh count 196-305 threads/inch (77-120 threads/cm) can be used depending on desired ink film thickness. Printing two layers is recommended for maximum dielectric properties and to minimize voids. A total cured deposit of 0.75-2.0 mil may be required to meet specific insulation targets.
DSU4606G is suitable for use on hand; semi-automatic or fully automatic screen printing machines. Polyester or Stainless screens with mesh count 196-305 threads/inch (77-120 threads/cm) can be used depending on desired ink film thickness. Printing two layers is recommended for maximum dielectric properties and to minimize voids. A total cured deposit of 0.75-2.0 mil may be required to meet specific insulation targets.
法的情報
SunTronic is a registered trademark of Sun Chemical, Inc.
シグナルワード
Warning
危険有害性情報
危険有害性の分類
Eye Irrit. 2 - Skin Irrit. 2 - Skin Sens. 1
保管分類コード
10 - Combustible liquids
WGK
WGK 3
引火点(℃)
> 110.5 °C
最新バージョンのいずれかを選択してください：
資料
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
時任教授と竹田教授が、プリントおよび溶液処理された、低コストで高度にフレキシブルな有機エレクトロニクスデバイスのための、新しい材料、デバイス構造設計の原則、および性能最適化のプロトコルを紹介します。
アクティブなフィルタ
ライフサイエンス、有機合成、材料科学、クロマトグラフィー、分析など、あらゆる分野の研究に経験のあるメンバーがおります。.
製品に関するお問い合わせはこちら（テクニカルサービス）
