Ugrás a tartalomra
Merck

MPGP02001

Milli-Q

Millipak® Express Filter

0.22 µm membrane filter for particulate-free and bacteria-free water at the point of dispense, For use with Direct-Q®, Synergy® and Milli-Q® Academic / Biocel / Element / Synthesis / Gradient systems

Szinonimák:

Millipak® Express 20 Filter

Bejelentkezésa Szervezeti és Szerződéses árazás megtekintéséhez


About This Item

UNSPSC kód:
41104212
eCl@ss:
33050190
NACRES:
JA.14

material

polyethersulfone filter
styrene-acrylonitrile (SAN) housing

Minőségi szint

sterilitás

non-sterile

Jellemzők

removal of particulates and bacteria

kiszerelés

pkg of 1 unit

gyártó/kereskedő neve

Millipak®

matrix

Durapore®

pórusméret

0.22 μm pore size

kompatibilitás

for use with Direct-Q® UV
for use with Direct-Q®
for use with Milli-Q® Academic
for use with Milli-Q® Biocel
for use with Milli-Q® Element
for use with Milli-Q® Gradient
for use with Milli-Q® Synthesis
for use with Synergy® UV
for use with Synergy®

kiszállítva

ambient

Looking for similar products? Látogasson el ide Útmutató a termékösszehasonlításhoz

Általános leírás

The Millipak® 0.22 μm hydrophilic membrane filter is intended to produce particulate- and bacteria-free water at the point of dispense of the water purification systems. The filter is designed with a 0.22 μm PES (polyethersulfone) asymmetric membrane filter heat-sealed on a styrene acrylonitrile housing. This minimizes organic and inorganic extractable release.

Alkalmazás

Purified water filtered through this filter can be used in any laboratory work where water free of bacteria or particulates is needed.

Tulajdonságok és előnyök

  • The unit is designed as a safe and efficient barrier against particulates and bacteria.
  • The membrane′s conical pores allow a high flow rate at a low differential pressure.
  • The membrane, housing material, and production processes have been selected to minimize organic and inorganic extractable release.
  • The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.
  • Connects to the outlet of the water delivery point, such as the PODs of Milli-Q® water purification systems.
  • The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
  • Care-free maintenance: the filter is easily fitted and replaced.
  • Non-sterile. Delivered hermetically sealed, with its Certificate of Quality.

Egyéb megjegyzések

Directions for Use

  • Organism Retention: Microorganisms
  • Mode of Action: Filtering
  • Application: General laboratory analysis
  • Intended Use: Water purification
  • Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to the system equipment user guide section "Using the System" (available on USB key in the system box).
  • Storage Statement: Store in a dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Jogi információk

DIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
SYNERGY is a registered trademark of Merck KGaA, Darmstadt, Germany

Analitikai tanúsítványok (COA)

Analitikai tanúsítványok (COA) keresése a termék sarzs-/tételszámának megadásával. A sarzs- és tételszámok a termék címkéjén találhatók, a „Lot” vagy „Batch” szavak után.

Már rendelkezik ezzel a termékkel?

Az Ön által nemrégiben megvásárolt termékekre vonatkozó dokumentumokat a Dokumentumtárban találja.

Dokumentumtár megtekintése

Tudóscsoportunk valamennyi kutatási területen rendelkezik tapasztalattal, beleértve az élettudományt, az anyagtudományt, a kémiai szintézist, a kromatográfiát, az analitikát és még sok más területet.

Lépjen kapcsolatba a szaktanácsadással