Pular para o conteúdo
Merck

Comparison of different urine pretreatments for biological monitoring of pyrethroid insecticides.

Journal of analytical toxicology (2014-12-30)
Hiroki Toshima, Jun Yoshinaga, Hiroaki Shiraishi, Yuki Ito, Michihiro Kamijima, Jun Ueyama
RESUMO

During a cross-validation practice of urinary analysis of pyrethroid insecticide metabolite (3-phenoxybenzoic acid, 3-PBA) by two laboratories (Lab A and Lab B), difference in 3-PBA concentration was noticed. The analytical methods used in the exercise were enzymatic deconjugation (glucuronidase/sulfatase) followed by solid phase extraction and isotope dilution LC-MS-MS determination (Lab A) and acidic deconjugation followed by liquid-liquid extraction and gas chromatography-mass spectrometry determination (Lab B). A significant difference was found for one of the five samples: lower value was obtained in Lab A. Use of acidic deconjugation in Lab A resulted in comparable value with the analytical result for this sample originally obtained in Lab B. The comparison was extended to 42 urine samples taken from Japanese males in Lab A by using the two different deconjugation methods and LC-MS-MS determination. Significantly lower value was obtained for enzymatic deconjugation in some of the 42 urine samples. The results suggested the presence of other conjugated species of 3-PBA than glucuronide and sulfate in human urine. Although the overall agreement between the values obtained by the deconjugation methods was fair, it appears that urine samples should be pretreated by acidic deconjugation for the analysis in biological monitoring of pyrethroid exposure.

MATERIAIS
Número do produto
Marca
Descrição do produto

Sigma-Aldrich
Ácido clorídrico, ACS reagent, 37%
Sigma-Aldrich
Ácido clorídrico, ACS reagent, 37%
Sigma-Aldrich
Cloreto de hidrogênio, 4.0 M in dioxane
Sigma-Aldrich
Metil-terc-butil éter, suitable for HPLC, ≥99.8%
Sigma-Aldrich
Metil-terc-butil éter, ACS reagent, ≥99.0%
Sigma-Aldrich
Ácido clorídrico, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Metil-terc-butil éter, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
Sigma-Aldrich
Ácido clorídrico, 37 wt. % in H2O, 99.999% trace metals basis
Sigma-Aldrich
Ácido clorídrico, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Ácido clorídrico, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
Sigma-Aldrich
Ácido clorídrico, 36.5-38.0%, BioReagent, for molecular biology
Sigma-Aldrich
Cloreto de hidrogênio, 2.0 M in diethyl ether
Sigma-Aldrich
Metil-terc-butil éter, reagent grade, ≥98%
Supelco
Ácido clorídrico, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Cloreto de hidrogênio, 1.0 M in diethyl ether
Sigma-Aldrich
Ácido clorídrico, puriss., 24.5-26.0%
Sigma-Aldrich
Metil-terc-butil éter, anhydrous, 99.8%
Sigma-Aldrich
Metil-terc-butil éter, puriss. p.a., ≥99.5% (GC)
Sigma-Aldrich
Ácido clorídrico, ~6 M in H2O, for amino acid analysis
Sigma-Aldrich
Cloreto de hidrogênio, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
Ácido clorídrico, 32 wt. % in H2O, FCC
Sigma-Aldrich
Cloreto de hidrogênio, 1.0 M in acetic acid
Supelco
Hydrogen chloride – methanol solution, ~1.25 m HCl (T), for GC derivatization, LiChropur
Sigma-Aldrich
Metil-terc-butil éter, reagent grade, 98%
Supelco
Hydrogen chloride – ethanol solution, ~1.25 M HCl, for GC derivatization, LiChropur
Supelco
Metil-terc-butil éter, analytical standard
Supelco
Hydrogen chloride – 2-propanol solution, ~1.25 M HCl (T), for GC derivatization, LiChropur
Supelco
Metil-terc-butil éter, Pharmaceutical Secondary Standard; Certified Reference Material