SW19A47FF3

Milligard^® 1.2 µm, OptiScale^® Capsule

filtration area 17.7 cm², OptiScale^® 47, pore size 1.2 μm

• Sinônimo(s): Optiscale Capsule Filter Milligard 1.2 μm 3/4 in. TC/TC
• Código UNSPSC: 23151806
• eCl@ss: 32031690

Propriedades

• Materiais: PVDF vent cap; fluoroelastomer FKM seal; mixed cellulose esters (MCE) ; polycarbonate ; polypropylene support
• Nível de qualidade: 400
• conformidade reg.: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• esterilidade: non-sterile
• Compatibilidade de esterilização: autoclavable compatible
• linha de produto: OptiScale^® 47
• Características: hydrophilic
• fabricante/nome comercial: OptiScale^®
• Parâmetros: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• técnica(s): prefiltration: suitable
• Diâmetro: 6.9 cm (2.7 in.)
• área de filtração: 17.7 cm²
• diâm. conexão de entrada: 3/4 in.
• diam. conexão de saída: 3/4 in.
• Impurezas: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• matriz: Milligard^®
• tamanho de poro: 1.2 μm nominal pore size; 1.2 μm pore size
• conector: inlet sanitary flange; outlet sanitary flange; (19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)

Descrição

Descrição geral

Device Configuration: Capsule

Características e benefícios

Format: Single Layer

Outras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Nota de preparo

Sterilization Method
3 autoclave cycles of 60 min @ 121 °C; not in-line steam sterilizable

Nota de análise

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Informações legais

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Informações de segurança

• Código de classe de armazenamento: 4.1B - Flammable solid hazardous materials
• Classe de risco de água (WGK): WGK 2