Accéder au contenu
Merck
  • Polychlorinated biphenyls and organochlorine pesticides in atmospheric particulate matter of Northern China: distribution, sources, and risk assessment.

Polychlorinated biphenyls and organochlorine pesticides in atmospheric particulate matter of Northern China: distribution, sources, and risk assessment.

Environmental science and pollution research international (2015-07-04)
Shuangshuang Ding, Faqin Dong, Bin Wang, Shu Chen, Liufei Zhang, Mengjun Chen, Mei Gao, Ping He
RÉSUMÉ

The objectives of this work are to track the contamination levels, distribution characteristics, and sources of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in atmospheric particulate matter (APM) of Northern China and to provide more comprehensive and fundamental data for risk assessment of organochlorine contaminants (OCs) in environments. Samples were extracted and purified by the microwave-assisted extraction and solid-phase extraction system, respectively. PCBs and OCPs were analyzed by gas chromatograph-mass spectrometer. The concentrations of ΣPCBs and ΣOCPs ranged from 0.73 to 112.65 ng/g and 0.14 to 34.73 ng/g, respectively. PCBs in atmospheric particulates collected from Shijiazhuang City had the highest concentration, whereas OCP congeners were at the relatively low levels. However, the highest concentration of OCPs occurred in Yongning City. The principal component analysis indicated that the predominant compositions of PCBs in most of samples were tetrachlorobiphenyl (Tetra-CB), pentachlorobiphenyl (Penta-CB), hexachlorobiphenyl (Hexa-CB), and heptachlorbiphenyl (Hepta-CB), while hexachlorocyclohexanes (HCHs), DDTs, chlordanes, and endosulfans were the dominant components of OCPs, which was attributed to their application characteristics. OCs in those particles were further used to assess a potential cancer risk to humans via ingestion, dermal contact, and inhalation. Cancer risk was evaluated in airborne particles caused by PCBs and OCPs. TEQPCBs values suggested that the representative areas were subject to different pollution degrees. However, the pollution of OCPs in certain areas should be a concern due to 41.6% of the high risk, which could pose a potential risk to organisms.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Acétone, ACS reagent, ≥99.5%
Sigma-Aldrich
Méthanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Acétate d'éthyle, ACS reagent, ≥99.5%
Sigma-Aldrich
Dichlorométhane, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
Cyclohexane, ACS reagent, ≥99%
Sigma-Aldrich
Hexane, Laboratory Reagent, ≥95%
Sigma-Aldrich
Dichlorométhane, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Méthanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Méthanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Méthanol, Absolute - Acetone free
Sigma-Aldrich
Méthanol, BioReagent, ≥99.93%
Sigma-Aldrich
Acétone, ACS reagent, ≥99.5%
Sigma-Aldrich
Méthanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Acétone, histological grade, ≥99.5%
Sigma-Aldrich
Dichlorométhane, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Méthanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Acétate d'éthyle, ≥99%, FCC, FG
Sigma-Aldrich
Acétone, natural, ≥97%
Sigma-Aldrich
Acétate d'éthyle
Sigma-Aldrich
Acétate d'éthyle, ACS reagent, ≥99.5%
Sigma-Aldrich
Cyclohexane, ACS reagent, ≥99%
Sigma-Aldrich
Acétone, ≥99%, meets FCC analytical specifications
Sigma-Aldrich
Dichlorométhane, biotech. grade, 99.9%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Acétate d'éthyle, natural, ≥99%, FCC, FG
Sigma-Aldrich
Acétate d'éthyle, biotech. grade, ≥99.8%
Sigma-Aldrich
Méthanol, NMR reference standard
Sigma-Aldrich
Acétate d'éthyle
Sigma-Aldrich
Methanol solution, NMR reference standard, 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.
Sigma-Aldrich
Methanol-12C, 99.95 atom % 12C
Sigma-Aldrich
Dichlorométhane, suitable for HPLC, ≥99.9%, contains 40-150 ppm amylene as stabilizer