Direkt zum Inhalt
Merck
  • An alternative SEM drying method using hexamethyldisilazane (HMDS) for microbial cell attachment studies on sub-bituminous coal.

An alternative SEM drying method using hexamethyldisilazane (HMDS) for microbial cell attachment studies on sub-bituminous coal.

Journal of microbiological methods (2012-05-09)
Nur Hazlin Hazrin-Chong, Mike Manefield
ZUSAMMENFASSUNG

The use of hexamethyldisilazane (HMDS) as a drying agent was investigated in the specimen preparation for scanning electron microscopy (SEM) imaging of bacterial surface colonization on sub-bituminous coal. The ability of microbes to biofragment, ferment and generate methane from coal has sparked interest in the initial attachment and colonization of coal surfaces. HMDS represents an attractive alternative to critical point drying (CPD) in the imaging of cells on coal, negating the need for expensive equipment. Coal is easily fragmented into sub-micron particles, which can be problematic in critical point drying procedures. In this study, both individual and aggregated cells appeared well shaped with minimal occurrence of flattened cells, signifying the suitability of HMDS in cell attachment studies on sub-bituminous coal. In the absence of glucose, microcolonies of short and long cells showed similar positive results using this method. EPS shrinkage found in microcolonies was inevitable, though this enabled observation of points of attachment between cells and with coal, which would be less effective if the EPS was intact. Overall the use of HMDS drying is preferred over the more commonly used CPD method as it is safer, cheaper and more practical.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 1.0 M in THF
Sigma-Aldrich
Hexamethyldisilazan, reagent grade, ≥99%
Sigma-Aldrich
Natrium-bis(trimethylsilyl)amid -Lösung, 1.0 M in THF
Sigma-Aldrich
Kalium-bis(trimethylsilyl)amid -Lösung, 1 M in THF
Sigma-Aldrich
Kalium-bis(trimethylsilyl)amid, 95%
Sigma-Aldrich
Hexamethyldisilazan, ReagentPlus®, 99.9%
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid, 97%
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 1 M in toluene
Sigma-Aldrich
Natrium-bis(trimethylsilyl)amid, 95%
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 1.5 M in THF
Sigma-Aldrich
Kalium-bis(trimethylsilyl)amid -Lösung, 0.5 M in toluene
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 1.0 M in hexanes
Sigma-Aldrich
Natrium-bis(trimethylsilyl)amid -Lösung, 40% in THF
Supelco
Hexamethyldisilazan, for GC derivatization, LiChropur, ≥99.0% (GC)
Sigma-Aldrich
Hexamethyldisilazan, produced by Wacker Chemie AG, Burghausen, Germany, ≥97.0% (GC)
Sigma-Aldrich
Natrium-bis(trimethylsilyl)amid -Lösung, 0.6 M in toluene
Sigma-Aldrich
Tris[N,N-bis(trimethylsilyl)amid]yttrium
Sigma-Aldrich
Kalium-bis(trimethylsilyl)amid -Lösung, 1.0 M in 2-methyltetrahydrofuran
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 1 M in tert-butyl methyl ether
Sigma-Aldrich
Lithium-bis-(trimethylsilyl)-amid -Lösung, 0.5 M in 2-methyltetrahydrofuran
Sigma-Aldrich
Tris[N,N-bis(trimethylsilyl)amid]samarium(III), 98%