There is no specific information available on the exact drying time after printing ink. Overnight drying is generally recommended, but it is important to consider the substrate and environmental conditions, as these can influence the actual drying time. If precise drying time is required, conducting a test on the specific substrate used may provide better guidance.
791873
Conductive silver printing ink, resistivity 5-6 Ω cm
Synonim(y):
Greatcell Solar®, Dyesol(R) DYAG50 conductive silver ink, Screen printable silver paste
Zaloguj sięWyświetlanie cen organizacyjnych i kontraktowych
Wybierz wielkość
10 G
1450,00 zł
20 G
2580,00 zł
1450,00 zł
Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności
Poproś o zamówienie zbiorcze
Wybierz wielkość
Zmień widok
10 G
1450,00 zł
20 G
2580,00 zł
About This Item
Kod UNSPSC:
12352103
NACRES:
NA.23
1450,00 zł
Skontaktuj się z Obsługą Klienta, aby uzyskać informacje na temat dostępności
Poproś o zamówienie zbiorcze
Polecane produkty
opis
volume resistivity 5 - 6 Ω cm
Poziom jakości
Próba
75-85% solids basis
Formularz
paste (white)
lepkość
13,000-17,000 mPa.s (at shear rate of 10 sec-1 at 25°C)
Powiązane kategorie
Opis ogólny
Sheet Resistivity is 2.0 - 2.4 μΩ/ square / mil. (at a 180°C cure temperature)
Zastosowanie
Use this Conductive Silver Ink to achieve exceptionally high conductivity at low cure temperatures when printing on a variety of substrates, including glass, polyesters (PET/PEN), and ITO/FTO coated substrates.
This Conductive Silver Printing Ink is a specially formulated ink which provides exceptionally high conductivity at low cure temperatures. This highly conductive ink provides extremely low resistance printed conducting tracks, essential for the photovoltaic applications. By providing the lowest track resistances of printed current collectors, this material is a key enabler in plastic electronics, such as, DSSC, OPV, and CdTe solar cells.
This Conductive Silver Printing Ink is a specially formulated ink which provides exceptionally high conductivity at low cure temperatures. This highly conductive ink provides extremely low resistance printed conducting tracks, essential for the photovoltaic applications. By providing the lowest track resistances of printed current collectors, this material is a key enabler in plastic electronics, such as, DSSC, OPV, and CdTe solar cells.
Informacje prawne
Product of Greatcell Solar Materials Pty Ltd.
GreatcellSolar is a registered trademark of Greatcell Solar Materials Pty Ltd.
GreatcellSolar is a registered trademark of Greatcell Solar Materials Pty Ltd.
Greatcell Solar is a registered trademark of Greatcell Solar
Ta strona może zawierać tekst przetłumaczony maszynowo.
Hasło ostrzegawcze
Warning
Zwroty wskazujące rodzaj zagrożenia
Zwroty wskazujące środki ostrożności
Klasyfikacja zagrożeń
Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2 - Skin Irrit. 2
Kod klasy składowania
10 - Combustible liquids
Klasa zagrożenia wodnego (WGK)
WGK 3
Temperatura zapłonu (°F)
174.2 °F
Temperatura zapłonu (°C)
79 °C
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
Klienci oglądali również te produkty
Metin Uz et al.
ACS applied materials & interfaces, 12(11), 13529-13539 (2020-02-23)
In this study, a simple microfluidic method, which can be universally applied to different rigid or flexible substrates, was developed to fabricate high-resolution, conductive, two-dimensional and three-dimensional microstructured graphene-based electronic circuits. The method involves controlled and selective filling of microchannels
Produkty
The ability to pattern conductive electrodes is technologically relevant for several applications, including photovolatics, displays, sensors, and biomedical devices.
Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.
Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
-
How long does it take to dry naturally after printing ink?
1 answer-
Helpful?
-
-
What is the particle size distribution of the colloidal silver in this ink? What would be the best solvent to use to remove the residual ink from a screen printing mesh?
1 answer-
This item is a product of Greatcell Solar Materials. The manufacturer considers the particle size distribution to be proprietary. The preferred solvent for the removal of residual ink is ethanol. However, the end-user should ensure that the screen material is compatible with the ethanol and ink components before use. The ink components can be found in the product Safety Data Sheet.
Helpful?
-
Active Filters
Nasz zespół naukowców ma doświadczenie we wszystkich obszarach badań, w tym w naukach przyrodniczych, materiałoznawstwie, syntezie chemicznej, chromatografii, analityce i wielu innych dziedzinach.
Skontaktuj się z zespołem ds. pomocy technicznej
