1.50649

Purospher^® STAR RP-18 endcapped (2 µm) HPLC Columns

L × I.D. 150 mm x 2.1 mm Hibar^® HR UHPLC Column

• Sinonimo/i: Purospher^® STAR RP-18 endcapped (2µm) Hibar^® HR 150-2.1
• Codice UNSPSC: 41115709
• NACRES: SB.52

Proprietà

• Nome del prodotto: Purospher^® STAR RP-18 endcapped (2 µm) UHPLC Columns, L × I.D. 150 mm x 2.1 mm Hibar^® HR UHPLC column
• Materiali: stainless steel column
• Livello qualitativo: 100
• agenzia: suitable for USP L1
• Nome Commerciale: Purospher^®
• Caratteristiche: endcapped
• Confezionamento: 1 ea of
• Grado di funzionalizzazione: 17% Carbon loading
• Parametri: 1000 bar pressure; 65 °C max. temp.
• tecniche: LC/MS: suitable; UHPLC-MS: suitable; UHPLC: suitable; mass spectrometry (MS): suitable (High)
• Lungh. × diam. int. colonna: 15 cm × 2.1 mm
• Matrice: fully porous particle
• Gruppo funzionale matrice: C18 bonding phase
• Dimensione particelle: 2 μm
• Dimensione pori: 120 Å pore size
• Intervallo di pH d’impiego: 1.5-10.5
• Tecnica di separazione: reversed phase; supercritical fluid (SFC)
• Temperatura di conservazione: no temp limit

Descrizione

Descrizione generale

Purospher^® STAR RP-18 endcapped, 2 µm UHPLC columns are designed for use in UHPLC Applications and instruments providing full UHPLC resolution and highest separation efficiency′s at maximum pressure of 1000 bar.Purospher^® STAR RP-18 endcapped, 2 µm UHPLC columns allow the separation of basic, neutral, and metal chelating compounds with simple mobile phases and excellent peak symmetry. They are based on ultra-pure fully porous silica particles (Type B). These columns offer an outstanding stability from pH 1.5 to 10.5 over a wide temperature range, and suitability for up to 100% aqueous mobile phases. Plus, they demonstrate best all-round retention characteristics, as proven by the Tanaka test. Purospher^® STAR RP-18 endcapped, 2 µm Hibar^® HR 150-2.1 is a ready to use UHPLC column suitable for connection to any UHPLC system providing a pressure stability of 1000 bar.The column dimension of 150 mm length x 2.1 mm I.D. is the optimal choice for fast UHPLC separation of complex samples allowing significant solvent savings and improved sensitivity.Learn more about Purospher^® STAR HPLC and UHPLC ColumnsLearn more about the Supelco HPLC Column portfolio and Method development:Brochure: HPLC and UHPLC Column Selection GuideBrochure: A Practical Guide to HPLC - Method Development Guide

Applicazioni

Intended to be used in the separation of aflatoxins, aldehydes, alkaloids, antibiotics, catecholamines, explosives, oligonucleotides, esters, fat soluble vitamins, lipids, fatty acids, flavonoids, ketones, nitrosamines, nucleosides, PAHs, PCBs, peptides, pesticides, phenols, phthalates, preservatives, steroids, metabolized steroids, sulfonamides, sweeteners, and water soluble vitamins.

Caratteristiche e vantaggi

• Ultra-pure silica (99.999%) for excellent peak symmetry
• High separation efficiency
• Reproducible results from run-to-run and batch-to-batch
• Best all-round performance according to Tanaka
• Outstanding pH stability from pH 1.5 to 10.5
• No phase collapse when using highly aqueous mobile phases
• Good suitability for LC-MS applications

Risultati analitici

Pressure: ≤ 420 bar
Theoretical Plates (N/m) (1,2-Benzanthracene): ≥ 170000
Symmetry (1,2-Benzanthracene): 0.8 - 1.4
Capacity factor (1,2-Benzanthracene): 8.5 - 11.5

Note legali

Hibar is a registered trademark of Merck KGaA, Darmstadt, Germany

Purospher is a registered trademark of Merck KGaA, Darmstadt, Germany