Direkt zum Inhalt
Merck
  • Cost-Effective and Highly Photoresponsive Nanophosphor-P3HT Photoconductive Nanocomposite for Near-Infrared Detection.

Cost-Effective and Highly Photoresponsive Nanophosphor-P3HT Photoconductive Nanocomposite for Near-Infrared Detection.

Scientific reports (2015-11-17)
Yi Tong, Xinyu Zhao, Mei Chee Tan, Rong Zhao
ZUSAMMENFASSUNG

The advent of flexible optoelectronic devices has accelerated the development of semiconducting polymeric materials. We seek to replace conventional expensive semiconducting photodetector materials with our cost-effective composite system. We demonstrate in this work the successful fabrication of a photoconductive composite film of poly(3-hexylthiophene-2,5-diyl) (P3HT) mixed with NaYF4:Yb,Er nanophosphors that exhibited a ultrahigh photoresponse to infrared radiation. The high photocurrent measured was enabled by the unique upconversion properties of NaYF4:Yb,Er nanophosphors, where low photon energy infrared excitations are converted to high photon energy visible emissions that are later absorbed by P3HT. Here we report, a significant 1.10 × 10(5) times increment of photocurrent from our photoconductive composite film upon infrared light exposure, which indicates high optical-to-electrical conversion efficiency. Our reported work lays the groundwork for the future development of printable, portable flexible and functional photonic composites for light sensing and harvesting, photonic memory devices, and phototransistors.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Trifluoressigsäure, ReagentPlus®, 99%
Sigma-Aldrich
Toluol, ACS reagent, ≥99.5%
Sigma-Aldrich
Trifluoressigsäure, puriss. p.a., suitable for HPLC, ≥99.0% (GC)
Sigma-Aldrich
Oleylamin, technical grade, 70%
Sigma-Aldrich
Oleinsäure, technical grade, 90%
Sigma-Aldrich
1-Octadecen, technical grade, 90%
Sigma-Aldrich
Toluol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.7% (GC)
Sigma-Aldrich
Trifluoressigsäure, ≥99%, for protein sequencing
Sigma-Aldrich
Oleinsäure, BioReagent, suitable for cell culture
Sigma-Aldrich
Natrium-trifluoracetat, 98%
Sigma-Aldrich
Toluol, anhydrous, 99.8%
Sigma-Aldrich
Toluol, ACS reagent, ≥99.5%
Sigma-Aldrich
Oleinsäure, natural, FCC
SAFC
Oleylamin, ≥98% (primary amine)
Sigma-Aldrich
Oleinsäure, meets analytical specification of Ph, Eur., 65.0-88.0% (GC)
Sigma-Aldrich
Toluol, Laboratory Reagent, ≥99.3%
Sigma-Aldrich
Oleinsäure, ≥99% (GC)
Sigma-Aldrich
1-Octadecen, ≥95.0% (GC)
Sigma-Aldrich
Toluol, ACS reagent, ≥99.5%
Sigma-Aldrich
Yttrium, chips, 99.9% trace rare earth metals basis
Sigma-Aldrich
Ytterbium, powder, ≥99.9% trace rare earth metals basis
Ytterbium, lump, 25g, max. size 25mm, 99.9%
Sigma-Aldrich
Yttrium-Sputtering-Target, diam. × thickness 2.00 in. × 0.25 in., 99.9% trace metals basis
Yttrium, wire reel, 0.1m, diameter 0.5mm, 99.9%
Yttrium, foil, 25mm disks, thickness 0.50mm, as rolled, 99%
Erbium, rod, 50mm, diameter 10.0mm, cast, 99%
Erbium, rod, 100mm, diameter 6.35mm, cast, 99%
Erbium, foil, 25x25mm, thickness 0.125mm, as rolled, 99%
Erbium, wire reel, 50mm, diameter 1.0mm, hard, 99.9%
Ytterbium, rod, 50mm, diameter 10.0mm, cast, 99%