Direkt zum Inhalt
Merck
Alle Fotos(1)

Wichtige Dokumente

Gesamtdokumentation anzeigen

646687

Sigma-Aldrich

Silizium

wafer (single side polished), <100>, N-type, contains no dopant, diam. × thickness 2 in. × 0.5 mm

Synonym(e):

Silicon element

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise

Größe auswählen

1 EA
CHF 252.00
5 EA
CHF 873.00

CHF 252.00

Check Cart for Availability
Bulk-Bestellung anfordern
Alle Fotos(1)

Größe auswählen

Ansicht ändern
1 EA
CHF 252.00
5 EA
CHF 873.00

About This Item

Lineare Formel:
Si
CAS-Nummer:
7440-21-3
Molekulargewicht:
28.09
EG-Nummer:
231-130-8
MDL-Nummer:
MFCD00085311
UNSPSC-Code:
12352300
PubChem Substanz-ID:
24883476
NACRES:
NA.23

CHF 252.00

Check Cart for Availability
Bulk-Bestellung anfordern

Form

crystalline (cubic (a = 5.4037))
wafer (single side polished)

Enthält nicht

dopant

Durchm. × Dicke

2 in. × 0.5 mm

bp

2355 °C (lit.)

mp (Schmelzpunkt)

1410 °C (lit.)

Dichte

2.33 g/mL at 25 °C (lit.)

Halbleitereigenschaften

<100>, N-type

SMILES String

[Si]

InChI

1S/Si

InChIKey

XUIMIQQOPSSXEZ-UHFFFAOYSA-N

Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich

Verwandte Kategorien

Allgemeine Beschreibung

Silicon wafers or a “slice” of substrate find applications in the fabrication of integrated circuits, solar cells etc. They serve as a substrate for various microelectronic devices.

Anwendung

  • Innovative Solutions for High-Performance Silicon Anodes in Lithium-Ion Batteries: Overcoming Challenges and Real-World Applications.: This article addresses the challenges and real-world applications of high-performance silicon anodes in lithium-ion batteries, presenting innovative solutions to enhance their efficiency (Khan et al., 2024).
  • Strain Engineering: Perfecting Freestanding Perovskite Oxide Fabrication.: This research focuses on strain engineering to improve the fabrication of freestanding perovskite oxides, which are crucial for various high-purity silicon applications in academia (Yun et al., 2024).

Physikalische Eigenschaften

0 vortex defects. Etch pitch density (EPD) < 100 (cm-2). Resistivity 100 - 3000 Ωcm
Oxygen content: ≤ 1~1.8 x 1018 /cm3; Carbon content: ≤ 5 x 1016 /cm3; Boule diameter: 1~8 ″

Lagerklassenschlüssel

13 - Non Combustible Solids

WGK

WGK 3

Flammpunkt (°F)

Not applicable

Flammpunkt (°C)

Not applicable

Persönliche Schutzausrüstung

Eyeshields, Gloves, type N95 (US)

Hier finden Sie alle aktuellen Versionen:

Analysenzertifikate (COA)

Lot/Batch Number
MKCW6935
MKCT4983
MKCT4982
MKCT4980
MKCT4978

Die passende Version wird nicht angezeigt?

Wenn Sie eine bestimmte Version benötigen, können Sie anhand der Lot- oder Chargennummer nach einem spezifischen Zertifikat suchen.

Suche nach COA

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Kunden haben sich ebenfalls angesehen

Slide 1 of 8

1 of 8

Siliziumdioxid single crystal substrate, optical grade, 99.99% trace metals basis, L × W × thickness 10&#160;mm × 10&#160;mm × 0.5&#160;mm

Sigma-Aldrich

634867

Siliziumdioxid

Silikon disks, 13mm, thickness 0.38mm, single crystal, 100%

GF72027266

Silikon

Silizium pieces, 99.95% trace metals basis

Sigma-Aldrich

343250

Silizium

Silizium wafer (single side polished), &#60;111&#62;, N-type, contains phosphorus as dopant, diam. × thickness 2&#160;in. × 0.5&#160;mm

Sigma-Aldrich

647799

Silizium

Silikon disks, 15.9mm, thickness 0.38mm, single crystal, n-type, 100%

GF46268433

Silikon

Silikon sheet, 10x10mm, thickness 0.6mm, single crystal, -100, 100%

GF71817543

Silikon

Strontiumtitanat single crystal substrate, &#60;100&#62;

Sigma-Aldrich

634689

Strontiumtitanat

Silizium sheet, 10x10mm, thickness 0.5mm, single crystal, -100, 100%

GF91141792

Silizium

Molecular monolayers on silicon surfaces.
Lopinski GP and Wayner DDM.
Material Matters, 3(2), 38-38 (2008)
Jaewoo Lee et al.
Journal of nanoscience and nanotechnology, 13(5), 3495-3499 (2013-07-19)
A spin-casting process for fabricating polycrystalline silicon sheets for use as solar cell wafers is proposed, and the parameters that control the sheet thickness are investigated. A numerical study of the fluidity of molten silicon indicates that the formation of
Jae Cheol Shin et al.
Journal of nanoscience and nanotechnology, 13(5), 3511-3514 (2013-07-19)
We have characterized the structural properties of the ternary In(x)Ga(1-x)As nanowires (NWs) grown on silicon (Si) substrates using metalorganic chemical vapor deposition (MOCVD). Au catalyzed vapor-liquid-solid (VLS) mode was used for the NW growth. The density of the In(x)Ga(1-x)As NW
Seungil Park et al.
Journal of nanoscience and nanotechnology, 13(5), 3397-3402 (2013-07-19)
We investigated the thin film growths of hydrogenated silicon by hot-wire chemical vapor deposition with different flow rates of SiH4 and H2 mixture ambient and fabricated thin film solar cells by implementing the intrinsic layers to SiC/Si heterojunction p-i-n structures.
Chengyong Li et al.
Journal of nanoscience and nanotechnology, 13(3), 2272-2275 (2013-06-13)
Mesoporous Si-C-O fibers were fabricated by air activation of a kind of carbon-rich SiC-C fibers at 600 degrees C. The SiC-C fibers were prepared from the hybrid precursor of polycarbosilane and pitch through melt-spinning, air curing and pyrolysis in nitrogen.
Alle zugehörigen Dokumente anzeigen

Artikel

Molecular Monolayers on Silicon Surfaces

Explore methods for molecular monolayers on silicon surfaces, their properties, and applications in molecular electronics and sensing.

Dye-Sensitized and Perovskite Solar Cells

Continuous efficiency improvements in photovoltaic devices result from material advancements and manufacturing innovation.

Synthesis of Melting Gels Using Mono-Substituted and Di-Substituted Alkoxysiloxanes

Synthesis of Melting Gels Using Mono-Substituted and Di-Substituted Alkoxysiloxanes

Atomic Layer Deposition of Nanomaterials for Li-Ion Batteries, Fuel Cells, and Solar Cells

Nanomaterials are considered a route to the innovations required for large-scale implementation of renewable energy technologies in society to make our life sustainable.

Protokolle

Negative Photoresist Procedure

Photoresist kit offers pre-weighed chemical components for lithographic processes, with separate etchants for various substrate choices.

Questions

1–4 of 4 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  3. Bonjour, quelle est la signification d'un type N si il n'a pas pas de dopant ?

    1 answer

    1. The Si wafer 646687 contains impurities even it is un-doped. So it could be N type.

      Helpful?

  4. Do the 2" Si wafers come with a flat or not?

    1 answer

    1. The silicon wafers have 2 flats <110><110>.

      Helpful?

Reviews

No rating value

Active Filters

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.