1.50256
Purospher® STAR RP-18 endcapped (5 µm) HPLC Columns
L × I.D. 250 mm x 2 mm LiChroCART™ HPLC cartridge, manuCART™ holder required for use
Sinônimo(s):
Purospher® STAR RP-18 endcapped (5 µm) LiChroCART™ 250-2
About This Item
Produtos recomendados
Nome do produto
Purospher® STAR RP-18 endcapped (5 µm), L × I.D. 250 mm x 2 mm LiChroCART™ HPLC cartridge, manuCART™ holder required for use
Materiais
stainless steel column
Nível de qualidade
Agency
suitable for USP L1
linha de produto
Purospher®
Características
endcapped
embalagem
1 ea of
Extensão da rotulagem
17% Carbon loading
Parâmetros
250 bar pressure
65 °C max. temp.
técnica(s)
HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (High)
coluna C × D.I.
25 cm × 2 mm
área da superfície
330 m2/g
Matriz
fully porous particle
Grupo ativo da matriz
C18 bonding phase
tamanho de partícula
5 μm
tamanho de poro
120 Å pore size
Faixa de pH operacional
1.5-10.5
técnica de separação
reversed phase
temperatura de armazenamento
no temp limit
Procurando produtos similares? Visita Guia de comparação de produtos
Descrição geral
These columns offer an outstanding stability from pH 1.5 to 10.5 over a wide temperature range, and suitability for up to 100% aqueous mobile phases. Plus, they demonstrate best all-round retention characteristics, as proven by the Tanaka test.
Purospher® STAR RP-18 endcapped, 5 µm LiChroCART™ 250-2 is a cartridge column which requires a manuCART™ cartridge column holder part number 1.51486.0001. The manuCART™ can be used to hold one cartridge column with or without direct integration of a guard column.
LiChroCART™ cartridge columns mounted with a manuCART™ cartridge column holder are hand-tight only and have therefore a maximum pressure stability of 250 bar.
For higher pressure stability requirements Purospher® STAR RP-18 endcapped, 5 µm Hibar® RT 250-2 HPLC columns are available part number 1.50598.0001.
For use under UHPLC conditions (where a pressure stability up to 1000 bar is required) it is recommended to use a Purospher® STAR RP-18 endcapped, 3 µm Hibar® HR 250-2.1 UHPLC Column part number 1.50655.0001
The column dimension of 250 mm length x 2 mm I.D. is the optimal choice for HPLC separation of complex samples at lower flow rate, allowing significant solvent savings and improved sensitivity
Learn more about Purospher® STAR HPLC and UHPLC Columns
Learn more about the Supelco HPLC Column portfolio and Method development:
Brochure: HPLC and UHPLC Column Selection Guide
Brochure: A Practical Guide to HPLC - Method Development Guide
Aplicação
Características e benefícios
- Ultra-pure silica (99.999%) for excellent peak symmetry
- High separation efficiency
- Reproducible results from run-to-run and batch-to-batch
- Best all-round performance according to Tanaka
- Outstanding pH stability from pH 1.5 to 10.5
- No phase collapse when using highly aqueous mobile phases
- Good suitability for LC-MS applications
Nota de análise
Theoretical Plates (N/m) (hexylbenzene): ≥ 70000
Symmetry (hexylbenzene): 0.8 - 1.4
Capacity factor (hexylbenzene): ≥ 8.0
Informações legais
Código de classe de armazenamento
11 - Combustible Solids
Certificados de análise (COA)
Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.
Já possui este produto?
Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.
Active Filters
Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.
Entre em contato com a assistência técnica