Direkt zum Inhalt
Merck

Environmental fate of the next generation refrigerant 2,3,3,3-tetrafluoropropene (HFO-1234yf).

Environmental science & technology (2014-10-21)
Jeongdae Im, Gillian E Walshe-Langford, Ji-Won Moon, Frank E Löffler
ZUSAMMENFASSUNG

The hydrofluoroolefin 2,3,3,3-tetrafluoropropene (HFO-1234yf) has been introduced to replace 1,1,1,2-tetrafluoroethane (HFC-134a) as refrigerant in mobile, including vehicle, air conditioning systems because of its lower global warming potential. HFO-1234yf is volatile at ambient temperatures; however, high production volumes and widespread handling are expected to release this fluorocarbon into terrestrial and aquatic environments, including groundwater. Laboratory experiments explored HFO-1234yf degradation by (i) microbial processes under oxic and anoxic conditions, (ii) abiotic processes mediated by reactive mineral phases and zerovalent iron (Fe(0), ZVI), and (iii) cobalamin-catalyzed biomimetic transformation. These investigations demonstrated that HFO-1234yf was recalcitrant to microbial (co)metabolism and no transformation was observed in incubations with ZVI, makinawite (FeS), sulfate green rust (GR(SO4)), magnetite (Fe(3)O(4)), and manganese oxide (MnO2). Sequential reductive defluorination of HFO-1234yf to 3,3,3-trifluoropropene and 3,3-dichloropropene with concomitant stoichiometric release of fluoride occurred in incubations with reduced cobalamins (e.g., vitamin B12) indicating that biomolecules can transform HFO-1234yf at circumneutral pH and at ambient temperature. Taken together, these findings suggest that HFO-1234yf recalcitrance in aquifers should be expected; however, HFO-1234yf is not inert and a biomolecule may mediate reductive transformation in low redox environments, albeit at low rates.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Trichlorethylen, ACS reagent, ≥99.5%
Sigma-Aldrich
Vitamin B12, ≥98%
Sigma-Aldrich
Tetrachlorethen, ACS reagent, ≥99.0%
Sigma-Aldrich
Titan(III)-chlorid -Lösung, 10-15% TiCl3 basis
Sigma-Aldrich
Vitamin B12, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥98%
Sigma-Aldrich
Aktivkohle-Norit®, Norit® PK 1-3, from peat, steam activated, granular
Sigma-Aldrich
Methylcobalamin, vitamin B12 analog
Supelco
Cyanocobalamin (B12), analytical standard
Sigma-Aldrich
Tetrachlorethen, suitable for HPLC, ≥99.9%
Supelco
Cyanocobalamin, pharmaceutical secondary standard, certified reference material
Sigma-Aldrich
Aktivkohle-Norit®, Norit® GAC 1240W, from coal, for potable water processing, steam activated, granular
Sigma-Aldrich
Kohlenstoff-Nanofasern, graphitized, platelets(conical), >98% carbon basis, D × L 100 nm × 20-200 μm
Sigma-Aldrich
Kohlenstoff, mesoporös, nanopowder, less than 500 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Kohlenstoff-Nanofasern, pyrolitically stripped, platelets(conical), >98% carbon basis, D × L 100 nm × 20-200 μm
Sigma-Aldrich
Aktivkohle-Norit®, Norit® RB3, for gas purification, steam activated, rod
Sigma-Aldrich
Aktivkohle-Norit®, Norit® SX2, powder, from peat, multi-purpose activated charcoal, steam activated and acid washed
Sigma-Aldrich
Aktivkohle-Norit®, Norit® CA1, wood, chemically activated, powder
Sigma-Aldrich
Kohlenstoff, mesoporös, nanopowder, graphitized, less than 250 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Titan(III)-chlorid, ≥99.995% trace metals basis
Sigma-Aldrich
Kohlenstoff, mesoporös, less than 100 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Kohlenstoff, mesoporös
Sigma-Aldrich
Tetrachlorethen, anhydrous, ≥99%
Sigma-Aldrich
Cyanocobalamin, meets USP testing specifications
Supelco
Trichlorethylen, analytical standard, stabilized with 30 – 50 ppm Diisopropylamine
Sigma-Aldrich
Kohlenstoff, mesoporös, hydrophilic pore surface
Sigma-Aldrich
Cyanocobalamin, tested according to Ph. Eur.
Sigma-Aldrich
Trichlorethylen, anhydrous, contains 40 ppm diisopropylamine as stabilizer, ≥99%
Carbon - Vitreous, rod, 100mm, diameter 5.0mm, glassy carbon
Supelco
Tetrachlorethen, analytical standard
Carbon - Vitreous, foam, 150x150mm, thickness 2.5mm, bulk density 0.05g/cm3, porosity 96.5%