1.51349

LiChrosorb^® RP-18 (5 µm) HPLC Columns

L x I.D. 125 mm x 4 mm, LiChroCART^™ HPLC cartridge, manuCART^™ holder required for use

• Synonym(e): TM=["LiChrosorb"] C18 TM=["LICHROCART"] cartridge for HPLC
• UNSPSC-Code: 41115709
• NACRES: SB.52

Eigenschaften

• Produktbezeichnung: LiChrosorb^® RP-18 (5 µm) LiChroCART^™ 125-4, suitable for HPLC
• Materialien: stainless steel column
• Qualitätsniveau: 100
• Agentur: suitable for USP L1
• Produktlinie: LiChrosorb^®
• Leistungsmerkmale: endcapped: no
• Parameter: 250 bar pressure; 60 °C max. temp.
• Methode(n): HPLC: suitable; mass spectrometry (MS): suitable (Low)
• Säule L × ID: 12.5 cm × 4 mm
• Matrix: fully porous particle
• Aktive Matrixgruppe: C18 bonding phase
• Partikelgröße: 5 μm
• Porengröße: 100 Å pore size
• pH Betriebsbereich: 2-7.5
• Trenntechnik: reversed phase
• Lagertemp.: no temp limit

Beschreibung

Allgemeine Beschreibung

HPLC cartridge

LiChrosorb^® RP-18 is a reliable irregular shaped silica gel carriers with reversed phase properties. It is well suited for the separation of neutral, acidic and weak basic compounds. This sorbent is packed into a LiChroCART 125-4 HPLC cartridge. The connection to the HPLC system is being accomplished by use of the manu-CART NT cartrige holder (1.51486).

Hinweis zur Analyse

Druck: ≤ 50 bar
Theoretische Bodenzahl (N/m) (Toluol): ≥ 50000
Symmetrie (Toluol): 0.8 - 1.4
Kapazitätsfaktor (Toluol): ≥ 0.8

Rechtliche Hinweise

LICHROCART is a trademark of Merck KGaA, Darmstadt, Germany

LiChrosorb is a registered trademark of Merck KGaA, Darmstadt, Germany