The density of the SnO₂/F coating is not determined. The coating thickness is approximately 550 nm. External sources report the density of SnO₂ at a range of 6.95 - 7.0 g/cm3. The density of SnO₂/F is expected to be similar.
Wichtige Dokumente
735140
Glasobjektträger, beschichtet mit Fluor-dotiertem Zinnoxid
L × W × thickness 50 mm × 50 mm × 2.2 mm, surface resistivity ~7 Ω/sq
Synonym(e):
TEC 7, FTO-Glas
Größe auswählen
About This Item
Empfohlene Produkte
Beschreibung
Haze: 5%
Qualitätsniveau
Zusammensetzung
SnO2/F
Verpackung
set of 5
Oberflächenwiderstand
~7 Ω/sq
L × B × Dicke
50 mm × 50 mm × 2.2 mm
Durchlässigkeit
80-82% (visible)
Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich
Verwandte Kategorien
Allgemeine Beschreibung
Anwendung
- Procyanidin B2 wird als Referenzstandard verwendet: Es wird zur Bestimmung des Proanthocyanidin-Gehalts in Cranberries mittels 4-(Dimethylamino)cinnamaldehyd-Assay verwendet. Dieser Standard hilft bei der Quantifizierung und Charakterisierung des Proanthocyanidin-Gehalts in Cranberrys, indem er einen bekannten Vergleichswert liefert. (Feliciano et al., 2012).
Lagerklassenschlüssel
13 - Non Combustible Solids
WGK
WGK 2
Flammpunkt (°F)
Not applicable
Flammpunkt (°C)
Not applicable
Hier finden Sie alle aktuellen Versionen:
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Kunden haben sich ebenfalls angesehen
Artikel
Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.
A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.
Next generation solar cells have the potential to achieve conversion efficiencies beyond the Shockley-Queisser (S-Q) limit while also significantly lowering production costs.
Dr. Perini and Professor Correa-Baena discuss the latest research and effort to obtain higher performance and stability of perovskite materials.
-
What is the density of the FTO
1 answer-
Helpful?
-
-
What is the maximum operating temperature of the fluorine-doped tin oxide coated glass slide with product number 735140?
1 answer-
The maximum operating temperature for this product is 450°C.
Helpful?
-
-
What is the thickness of the FTO layer?
1 answer-
As stated in the DESCIPTION section of the product page, the FTO coating thickness is ∼ 550 nm.
Helpful?
-
-
What is the maximum operation temperature of Florine dopped tin oxide coated glass slide? Product number- 735140
1 answer-
The maximum operating temperature for this product is 450°C.
Helpful?
-
-
What is the Department of Transportation shipping information for this product?
1 answer-
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
Helpful?
-
-
What type of glass is used for the fluorine doped tin oxide coated glass slides?
1 answer-
The fluorine doped tin oxide (FTO) coated glass slides use TEC GlassTM from Pilkington.
Helpful?
-
Active Filters
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.