Passa al contenuto
Merck
  • Optimization of extraction parameters on the isolation of phenolic compounds from sour cherry (Prunus cerasus L.) pomace.

Optimization of extraction parameters on the isolation of phenolic compounds from sour cherry (Prunus cerasus L.) pomace.

Journal of food science and technology (2015-04-22)
Fatih Mehmet Yılmaz, Mehmet Karaaslan, Hasan Vardin
ABSTRACT

There is an increasing interest to bio-components obtained from fruit & vegetable wastes. Anthocyanin is one of the components regained from fruits especially from red ones. Sour cherry is considered as industrial fruit since most of the grown fruit is processed into juice and hence considerable amount of pomace is removed from process. The influences of process parameters on the extraction of phenolic compounds from sour cherry pomace were investigated. Fifty-one percent ethanol concentration, 75 °C temperature and 12 mL/g solvent to solid ratio were selected as optimum process parameters. Time effect on the process efficiency was monitored at three different temperatures (25, 50 and 75 °C) and total phenolic and total anthocyanin contents were found to reach equilibrium concentrations between 80 and 100 min time intervals. Ethanol concentrations affected differently extraction yield of anthocyanins and non-anthocyanin phenolics. Various individual phenolic compounds present in sour cherry pomace were identified and quantified by HPLC equipped with UV/Vis PDA. Of the phenolic compounds, cyanidin-3-glucosylrutinoside, neochlorogenic acid and catechin were the most abundant ones found in the pomace. 14.23 ± 0.38 mg/g total phenolic, 0.41 ± 0.02 mg/g total anthocyanin, 0.19 ± 0.02 mg/g cyanidin-3-glucosylrutinoside, 0.22 ± 0.01 mg/g neochlorogenic acid and 0.22 ± 0.02 mg/g catechin contents (dry weight) were determined in the pomace at optimum extraction conditions.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Ethyl alcohol, Pure 200 proof, for molecular biology
Sigma-Aldrich
Acido cloridrico, ACS reagent, 37%
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, ACS reagent, ≥99.5%
Sigma-Aldrich
Acido cloridrico, ACS reagent, 37%
Sigma-Aldrich
Cloruro di idrogeno, 4.0 M in dioxane
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, meets USP testing specifications
Sigma-Aldrich
Ethyl alcohol, Pure 190 proof, for molecular biology
Sigma-Aldrich
Acido cloridrico, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Acido cloridrico, 37 wt. % in H2O, 99.999% trace metals basis
Sigma-Aldrich
Acido cloridrico, 36.5-38.0%, BioReagent, for molecular biology
Sigma-Aldrich
Cloruro di idrogeno, 2.0 M in diethyl ether
Sigma-Aldrich
Gallic acid, 97.5-102.5% (titration)
Sigma-Aldrich
Acido caffeico, ≥98.0% (HPLC)
Supelco
Acido cloridrico, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
p-Coumaric acid, ≥98.0% (HPLC)
Sigma-Aldrich
trans-Ferulic acid, 99%
Sigma-Aldrich
Cloruro di idrogeno, 1.0 M in diethyl ether
Sigma-Aldrich
Acido cloridrico, ~6 M in H2O, for amino acid analysis
Sigma-Aldrich
Cloruro di idrogeno, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
Etanolo, purum, fine spirit, denaturated with 4.8% methanol, F25 METHYL1, ~96% (based on denaturant-free substance)
Sigma-Aldrich
Acido cloridrico, 32 wt. % in H2O, FCC
Supelco
Ethanol solution, certified reference material, 2000 μg/mL in methanol
Sigma-Aldrich
trans-Ferulic acid, ≥99%
Sigma-Aldrich
Etanolo, purum, absolute ethanol, denaturated with 2% 2-butanone, A15 MEK1, ≥99.8% (based on denaturant-free substance)
Sigma-Aldrich
Neochlorogenic acid, from Lonicera japonica, ≥98.0% (HPLC)
Sigma-Aldrich
Etanolo, BioUltra, for molecular biology, ≥99.8%, (absolute alcohol, without additive, A15 o1)
Sigma-Aldrich
Cloruro di idrogeno, 1.0 M in acetic acid
Sigma-Aldrich
Etanolo, purum, fine spirit, denaturated with 2% 2-butanone, F25 MEK1, ~96% (based on denaturant-free substance)
Supelco
Etanolo, standard for GC
Supelco
Hydrogen chloride – methanol solution, ~1.25 m HCl (T), for GC derivatization, LiChropur