SSI TC-20 Tubing Cutter, product 58539-U, has a cutting arm that provides a square only (flat) cut of 1/16, 1/8 and 1/4 inch (1.6, 3.2 and 6.4 mm (maximum)) OD stainless steel tubing with ID down to 0.008 inches (0.2 mm).
58539-U
SSI™ TC-20 Tubing Cutter
AC/DC input 110 V / 220 V AC, 50-60 Hz (voltage selectable), CE compliant
Sinonimo/i:
Tubing Cutter Tool
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Codice UNSPSC:
41115700
NACRES:
SB.52
Prodotti consigliati
Caratteristiche
CE compliant
Descrizione generale
The SSI Model TC-20 electric stainless steel tube cutter assures a zero dead volume connection. Because the tubing is held securely in a clamp vise on the vertical swing arm, a square cut is produced when the swing arm is lowered against the abrasive cutting wheel, which produces a finished end. No lubricant or cutting fluid is required. The unit, which is CE marked, will cut most common tubing used in chromatography. Tubing with 1/16 in., 1/8 in., and 1/4 in. outside diameter, can be smooth-cut and dressed without distortion.
The precision ground dressing tool for the 1/16 in. O.D. tubing is included and is attached directly to the swing arm: it cannot be misplaced or lost. A dressing tool (deburring tool - Cat. No. 58804) for 1/8 in. diameter can be ordered separately.
The precision ground dressing tool for the 1/16 in. O.D. tubing is included and is attached directly to the swing arm: it cannot be misplaced or lost. A dressing tool (deburring tool - Cat. No. 58804) for 1/8 in. diameter can be ordered separately.
Note legali
SSI is a trademark of Scientific Systems, Inc.
Raccomandato
N° Catalogo
Descrizione
Determinazione del prezzo
Ricambio
N° Catalogo
Descrizione
Determinazione del prezzo
Scegli una delle versioni più recenti:
Certificati d'analisi (COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documenti section.
Se ti serve aiuto, non esitare a contattarci Servizio Clienti
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
-
What is the maximum OD of SS Pipe that this can cut? We need to cut 3/8" OD .035 wall 316 SS Pipe at both flat & a 45 degree. Can this machine cut at a 45 degree angle?
1 risposta-
Utile?
-
Filtri attivi
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.
