Passa al contenuto
Merck
Tutte le immagini(1)

Documenti fondamentali

43843

Supelco

Multielement Standard Solution 6 for ICP

TraceCERT®, 23 elements, 100 mg/L each in nitric acid and hydrofluoric acid

Sinonimo/i:

ICP Multi-Element Calibration Solution 6

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali

Scegli un formato

100 ML
161,00 €

161,00 €


Per informazioni sulla disponibilità, contatta il Servizio Clienti.

Richiedi un ordine bulk

Scegli un formato

Cambia visualizzazione
100 ML
161,00 €

About This Item

Codice UNSPSC:
41116107
NACRES:
NA.24

161,00 €


Per informazioni sulla disponibilità, contatta il Servizio Clienti.

Richiedi un ordine bulk

Grado

certified reference material
TraceCERT®

Livello qualitativo

Nome Commerciale

TraceCERT®

Durata

limited shelf life, expiry date on the label

tecniche

AAS: suitable
ICP: suitable

applicazioni

industrial qc
pharmaceutical

Formato

multi-component solution

Descrizione generale

This certified reference material (CRM) is produced in accordance with ISO 17034 and characterized in accordance with ISO/IEC 17025. This CRM is traceable to SI unit kg and measured against primary material from a National Metrology Institute (NMI), e.g. NIST.

Please visit ISO certificates and Site Quality Self-Assessments to access the current certificates of accreditation.

Download your certificate at https://www.sigma-aldrich.com to view certified values, including uncertainty, date of expiry, and detailed information about trace impurities.

Applicazioni

Multielement standard solution 6 can be used as a calibration standard in the:
  • Determination of trace metals in petroleum cokes using inductively coupled plasma optical emission spectrometry system (ICP-OES).[1]
  • Trace metal analysis of seawater and fish otoliths via ICP-MS, enhancing the detection and quantification of trace metals critical in environmental samples.[2]

Risultati analitici

100 mg/L: Al, Sb, Ba, Pb, B, Ca, Cd, Cr, Co, Fe, K, Cu, Li, Mg, Mn, Mo, Na, Ni, P, Si, Ti, V, and Zn in 5% nitric acid and ≤0.1 % hydrofluoric acid.

Altre note

For a complete product listing of our ICP and AAS range, including technical information and example certificates, please visit ICP & AAS standards website.

Detailed information on our complete workflow solutions for ICP-AAS can be found in our Brochure: High-Purity Chemicals for Inorganic Trace Analysis.

In our effort to be more sustainable, we′re going digital with COAs-download them directly from our website.

Note legali

TraceCERT is a registered trademark of Merck KGaA, Darmstadt, Germany

Avvertenze

Danger

Indicazioni di pericolo

Classi di pericolo

Carc. 1B - Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1B - Skin Sens. 1

Rischi supp

Classe di pericolosità dell'acqua (WGK)

WGK 3


Elenchi normativi

Forniamo informazioni su eventuali restrizioni prevalentemente per i prodotti chimici. Per altre tipologie di prodotto siamo in grado di fornire soltanto informazioni limitate. Nessuna segnalazione significa che nessuno dei componenti è citato in un elenco. È dovere dell’utilizzatore assicurarsi che il prodotto venga impiegato in maniera sicura e a norme di legge.

EU REACH Annex XVII (Restriction List)

EU REACH Annex XIV (Authorisation List)

CAS No.

Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number

It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documenti section.

Se ti serve aiuto, non esitare a contattarci Servizio Clienti

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Domande

1–3 di 3 domande  
  1. can you tell me the percent concentration of HF in this standard. I need to make sure it is compatible for use in systems that are running glass sample introduction systems. Is the HF at trace concentration to stabilize elements such as W, Si?

    1 risposta
    1. The percent concentration of HF in this standard is less than 0.1%. The HF is included to dissolve silicon (Si) and is at a low concentration. However, it is suggested to test the compatibility for use in systems with glass sample introduction systems.

      Utile?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 risposta
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Utile?

  3. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 risposta
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Utile?

Recensioni

Nessuna valutazione

Filtri attivi

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.