Přejít k obsahu
Merck
Všechny fotografie(1)

Key Documents

View All Documentation

647764

Sigma-Aldrich

Silicon

wafer (single side polished), <100>, P-type, contains boron as dopant, diam. × thickness 3 in. × 0.5 mm

Synonyma:

Silicon element

Přihlásitk zobrazení cen stanovených pro organizaci a smluvních cen
Všechny fotografie(1)

About This Item

Lineární vzorec:
Si
Číslo CAS:
7440-21-3
Molekulová hmotnost:
28.09
EC Number:
231-130-8
MDL number:
MFCD00085311
UNSPSC Code:
12352300
PubChem Substance ID:
24883547
NACRES:
NA.23

form

crystalline (cubic (a = 5.4037))
wafer (single side polished)

contains

boron as dopant

diam. × thickness

3 in. × 0.5 mm

bp

2355 °C (lit.)

mp

1410 °C (lit.)

density

2.33 g/mL at 25 °C (lit.)

semiconductor properties

<100>, P-type

SMILES string

[Si]

InChI

1S/Si

InChI key

XUIMIQQOPSSXEZ-UHFFFAOYSA-N

Hledáte podobné produkty? Navštivte Průvodce porovnáváním produktů

Physical properties

0 vortex defects. Etch pitch density (EPD) < 100 (cm-2). Resistivity 10-3 - 40 Ω•cm
Oxygen content: <= 1~1.8 x 1018 /cm3; Carbon content: <= 5 x 1016 /cm3; Boule diameter: 1~8 ″

Storage Class

13 - Non Combustible Solids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)

Osvědčení o analýze (COA)

Vyhledejte osvědčení Osvědčení o analýze (COA) zadáním čísla šarže/dávky těchto produktů. Čísla šarže a dávky lze nalézt na štítku produktu za slovy „Lot“ nebo „Batch“.

Již tento produkt vlastníte?

Dokumenty související s produkty, které jste v minulosti zakoupili, byly za účelem usnadnění shromážděny ve vaší Knihovně dokumentů.

Navštívit knihovnu dokumentů

Zákazníci si také prohlíželi

Slide 1 of 6

1 of 6

Gold coated silicon wafer 99.999% (Au), layer thickness 1000&#160;Å, 99.99% (Ti)

Sigma-Aldrich

643262

Gold coated silicon wafer

Silicon wafer (single side polished), &#60;111&#62;, N-type, contains phosphorus as dopant, diam. × thickness 2&#160;in. × 0.5&#160;mm

Sigma-Aldrich

647799

Silicon

Aldrich&#174; Negative Photoresist Kit I

Sigma-Aldrich

654892

Aldrich® Negative Photoresist Kit I

Silicon pieces, 99.95% trace metals basis

Sigma-Aldrich

343250

Silicon

Strontium titanate single crystal substrate, &#60;100&#62;

Sigma-Aldrich

634689

Strontium titanate

Gold beads, 1-6&#160;mm, 99.999% trace metals basis

Sigma-Aldrich

326542

Gold

Hyunhui Kim et al.
Journal of nanoscience and nanotechnology, 13(5), 3559-3563 (2013-07-19)
Silicon sheets were fabricated by a new fabricating method, spin casting with various rotation speeds of the graphite mold. The microstructure of spin-cast silicon sheets were investigated using an electron probe microanalyzer (EPMA) and scanning electron microscope/electron backscatter diffraction/orientation image
Youngin Jeon et al.
Journal of nanoscience and nanotechnology, 13(5), 3350-3353 (2013-07-19)
Si-nanowire (NW)-array-based NOT-logic circuits were constructed on plastic substrates. The Si-NW arrays were fabricated on a Si wafer through top-down methods, including conventional photolithography and crystallographic wet etching, and transferred onto the plastic substrates. Two field-effect transistors were fabricated on
Jae Cheol Shin et al.
Journal of nanoscience and nanotechnology, 13(5), 3511-3514 (2013-07-19)
We have characterized the structural properties of the ternary In(x)Ga(1-x)As nanowires (NWs) grown on silicon (Si) substrates using metalorganic chemical vapor deposition (MOCVD). Au catalyzed vapor-liquid-solid (VLS) mode was used for the NW growth. The density of the In(x)Ga(1-x)As NW
Chengyong Li et al.
Journal of nanoscience and nanotechnology, 13(3), 2272-2275 (2013-06-13)
Mesoporous Si-C-O fibers were fabricated by air activation of a kind of carbon-rich SiC-C fibers at 600 degrees C. The SiC-C fibers were prepared from the hybrid precursor of polycarbosilane and pitch through melt-spinning, air curing and pyrolysis in nitrogen.
Bo-Soon Kim et al.
Journal of nanoscience and nanotechnology, 13(5), 3622-3626 (2013-07-19)
A subwavelength structure (SWS) was formed via a simple chemical wet etching using a gold (Au) catalyst. Single nano-sized Au particles were fabricated by metallic self-aggregation. The deposition and thermal annealing of the thin metallic film were carried out. Thermal
Zobrazit všechny související dokumenty

Sortimentní položky

Synthesis of Melting Gels Using Mono-Substituted and Di-Substituted Alkoxysiloxanes

Hybrid organic-inorganic sol-gel materials containing silica were first called “ORMOSILs” in 1984.

Protokoly

Negative Photoresist Procedure

Photoresist kit offers pre-weighed chemical components for lithographic processes, with separate etchants for various substrate choices.

Náš tým vědeckých pracovníků má zkušenosti ve všech oblastech výzkumu, včetně přírodních věd, materiálových věd, chemické syntézy, chromatografie, analytiky a mnoha dalších..

Obraťte se na technický servis.