Přejít k obsahu
Merck
Všechny fotografie(4)

Key Documents

View All Documentation

215619

Sigma-Aldrich

Silicon

powder, −325 mesh, 99% trace metals basis

Přihlásitk zobrazení cen stanovených pro organizaci a smluvních cen
Všechny fotografie(4)

About This Item

Lineární vzorec:
Si
Číslo CAS:
7440-21-3
Molekulová hmotnost:
28.09
EC Number:
231-130-8
MDL number:
MFCD00085311
UNSPSC Code:
12141911
PubChem Substance ID:
24852908
NACRES:
NA.23

assay

99% trace metals basis

form

powder

particle size

−325 mesh

bp

2355 °C (lit.)

mp

1410 °C (lit.)

density

2.33 g/mL at 25 °C (lit.)

SMILES string

[Si]

InChI

1S/Si

InChI key

XUIMIQQOPSSXEZ-UHFFFAOYSA-N

Hledáte podobné produkty? Navštivte Průvodce porovnáváním produktů

General description

Silicon powder is a fine, gray powder. This silicon powder has been passed through a 325-mesh screen, meaning that the particles are small enough to pass through a sieve with openings that are approximately 44 thousandths of an inch in diameter. Silicon is a chemical element and is a hard, brittle, metallic-gray solid that is highly resistant to chemical attack and has a high melting point. Silicon is the second most abundant element in the Earth’s crust and is found in a variety of minerals.

Application

Silicon can be used as anode material in lithium-ion batteries.

It can be used to fabricate Al2O3-C refractories. The silicon powder generates β-Sialon whiskers which imparts high-temperature strength, slag resistance and thermal shock resistance of the refractories.

It can be incorporated into high-densitypolyethylene (HDPE) polymer composites. The addition of silicon powder enhancesthermal stability and thermal conductivity of composites.

pictograms

Flame
GHS02

signalword

Warning

hcodes

H228

Hazard Classifications

Flam. Sol. 2

Storage Class

4.1B - Flammable solid hazardous materials

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)

Osvědčení o analýze (COA)

Vyhledejte osvědčení Osvědčení o analýze (COA) zadáním čísla šarže/dávky těchto produktů. Čísla šarže a dávky lze nalézt na štítku produktu za slovy „Lot“ nebo „Batch“.

Již tento produkt vlastníte?

Dokumenty související s produkty, které jste v minulosti zakoupili, byly za účelem usnadnění shromážděny ve vaší Knihovně dokumentů.

Navštívit knihovnu dokumentů

Zákazníci si také prohlíželi

Slide 1 of 4

1 of 4

Silicon powder, 45 max. part. size (micron), weight 100 g, high purity 99.998%

GF64953614

Silicon

Silicon powder, max. particle size 45 micron, weight 50 g, high purity 99.998%

GF46525620

Silicon

Silicon powder, 150 max. part. size (micron), weight 200 g, purity 97.5%

GF63403152

Silicon

Silicon monoxide powder, −325 mesh

Sigma-Aldrich

262951

Silicon monoxide

Jae Cheol Shin et al.
Journal of nanoscience and nanotechnology, 13(5), 3511-3514 (2013-07-19)
We have characterized the structural properties of the ternary In(x)Ga(1-x)As nanowires (NWs) grown on silicon (Si) substrates using metalorganic chemical vapor deposition (MOCVD). Au catalyzed vapor-liquid-solid (VLS) mode was used for the NW growth. The density of the In(x)Ga(1-x)As NW
Jaewoo Lee et al.
Journal of nanoscience and nanotechnology, 13(5), 3495-3499 (2013-07-19)
A spin-casting process for fabricating polycrystalline silicon sheets for use as solar cell wafers is proposed, and the parameters that control the sheet thickness are investigated. A numerical study of the fluidity of molten silicon indicates that the formation of
Seungil Park et al.
Journal of nanoscience and nanotechnology, 13(5), 3397-3402 (2013-07-19)
We investigated the thin film growths of hydrogenated silicon by hot-wire chemical vapor deposition with different flow rates of SiH4 and H2 mixture ambient and fabricated thin film solar cells by implementing the intrinsic layers to SiC/Si heterojunction p-i-n structures.
Chengyong Li et al.
Journal of nanoscience and nanotechnology, 13(3), 2272-2275 (2013-06-13)
Mesoporous Si-C-O fibers were fabricated by air activation of a kind of carbon-rich SiC-C fibers at 600 degrees C. The SiC-C fibers were prepared from the hybrid precursor of polycarbosilane and pitch through melt-spinning, air curing and pyrolysis in nitrogen.
Bo-Soon Kim et al.
Journal of nanoscience and nanotechnology, 13(5), 3622-3626 (2013-07-19)
A subwavelength structure (SWS) was formed via a simple chemical wet etching using a gold (Au) catalyst. Single nano-sized Au particles were fabricated by metallic self-aggregation. The deposition and thermal annealing of the thin metallic film were carried out. Thermal
Zobrazit všechny související dokumenty

Sortimentní položky

Self-Propagating Reactions Induced by Mechanical Alloying

Mechanical alloying is a “brute force” method of affecting alloying and chemical reactions. The mixture of reactant powders and several balls are placed in the milling jar of a high-energy ball mill, for example, a shaker mill or a planetary mill.

Recent Developments in Silicon Anode Materials for High Performance Lithium-Ion Batteries

Recent demand for electric and hybrid vehicles, coupled with a reduction in prices, has caused lithium-ion batteries (LIBs) to become an increasingly popular form of rechargeable battery technology.

Silicides: Promising Thermoelectrics

Higher transition metal silicides are ideal for anisotropic thermoelectric conversion due to their Seebeck coefficient anisotropy and mechanical properties.

Electrode Materials for Li-ion Batteries

Solid oxide fuel cells and electrolyzers show potential for chemical-to-electrical energy conversion, despite early development stages.

Zobrazit všechny

Náš tým vědeckých pracovníků má zkušenosti ve všech oblastech výzkumu, včetně přírodních věd, materiálových věd, chemické syntézy, chromatografie, analytiky a mnoha dalších..

Obraťte se na technický servis.