Passa al contenuto
Merck
  • Selective formation of organo, organo-aqueous, and hydro gel-like materials from partially hydrolysed poly(vinyl acetate)s based on different boron-containing crosslinkers.

Selective formation of organo, organo-aqueous, and hydro gel-like materials from partially hydrolysed poly(vinyl acetate)s based on different boron-containing crosslinkers.

Soft matter (2015-06-02)
L V Angelova, M Leskes, B H Berrie, R G Weiss
ABSTRACT

Viscoelastic, gel-like, polymeric dispersions (HVPDs) can be prepared by crosslinking polyols with borax or boric acid in water under alkaline conditions. Rheologically similar HVPDs have been prepared in organic liquids containing no water or hydroxylic groups through crosslinking partially or fully hydrolysed poly(vinyl acetate)s with trimethyl borate, boric acid, or borax. The organo-HVPDs are water-sensitive and rheoreversible on exposure to water. They were characterised rheologically and by solution and solid-state (11)B NMR spectroscopy. Spectroscopic analyses show the presence of mono- and di-diol crosslinks, as well as non-crosslinked boron species in HVPDs prepared with trimethyl borate or boric acid. The number of crosslinks in organo-HVPDs prepared with borax increased over the course of several days. Results from solution and solid-state (11)B NMR spectroscopy are comparable; no solid-like component was detectable. We demonstrate that hydro, organo, or organo-aqueous HVPDs can be obtained from partially hydrolysed poly(vinyl acetate)s by 'tuning' the structure of the boron-based crosslinker.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Dimetil solfossido, Hybri-Max, sterile-filtered, BioReagent, suitable for hybridoma, ≥99.7%
Sigma-Aldrich
Dimetil solfossido, for molecular biology
Sigma-Aldrich
Dimetilsolfossido-d6, 99.9 atom % D
Sigma-Aldrich
Dimetil solfossido, sterile-filtered, BioPerformance Certified, meets EP, USP testing specifications, suitable for hybridoma
Sigma-Aldrich
Dimetilsolfossido-d6, 99.9 atom % D, contains 0.03 % (v/v) TMS
Sigma-Aldrich
N,N-dimetilformammide, anhydrous, 99.8%
Sigma-Aldrich
Dimetil solfossido, ≥99.5% (GC), suitable for plant cell culture
Sigma-Aldrich
Dimetil solfossido, anhydrous, ≥99.9%
Sigma-Aldrich
Sodium hydride, 60 % dispersion in mineral oil
Sigma-Aldrich
Dimetilsolfossido-d6, 99.5 atom % D
Sigma-Aldrich
Metanolo, anhydrous, 99.8%
Sigma-Aldrich
N,N-dimetilformammide, for molecular biology, ≥99%
Sigma-Aldrich
Dimetil solfossido, BioUltra, for molecular biology, ≥99.5% (GC)
Sigma-Aldrich
3,3′,5,5′-tetrametilbenzidina, ≥99%
Sigma-Aldrich
Sodium hydride, dry, 90%
Sigma-Aldrich
Dimetilsolfossido-d6, "100%", 99.96 atom % D
Sigma-Aldrich
Trimethyl borate, ≥98%
Sigma-Aldrich
Sodium methoxide solution, 25 wt. % in methanol
Sigma-Aldrich
Dimetilsolfossido-d6, anhydrous, 99.9 atom % D
Sigma-Aldrich
Dimetil solfossido, PCR Reagent
Sigma-Aldrich
3,3′,5,5′-tetrametilbenzidina, ≥98% (TLC)
Sigma-Aldrich
Dimetilsolfossido-d6, 99.9 atom % D, contains 1 % (v/v) TMS
Sigma-Aldrich
Sodium methoxide, reagent grade, 95%, powder
Sigma-Aldrich
Dimetil solfossido, meets EP testing specifications, meets USP testing specifications
Sigma-Aldrich
Sodium methoxide solution, ACS reagent, 0.5 M CH3ONa in methanol (0.5N)
Sigma-Aldrich
3,3′,5,5′-tetrametilbenzidina, ≥98.0% (NT)
Sigma-Aldrich
Dimetilsolfossido-d6, "100%", 99.96 atom % D, contains 0.03 % (v/v) TMS
Sigma-Aldrich
3,3′,5,5′-tetrametilbenzidina, tablet, 1 mg substrate per tablet
Sigma-Aldrich
Dimetilsolfossido-d6, "Special HOH", ≥99.9 atom % D
Sigma-Aldrich
Sodium tetraborate decahydrate, BioXtra, ≥99.5%