Direkt zum Inhalt
Merck
  • Using contemporary liquid chromatography theory and technology to improve capillary gradient ion-exchange separations.

Using contemporary liquid chromatography theory and technology to improve capillary gradient ion-exchange separations.

Journal of chromatography. A (2014-12-03)
Bert Wouters, Ken Broeckhoven, Sam Wouters, Cees Bruggink, Yury Agroskin, Christopher A Pohl, Sebastiaan Eeltink
ZUSAMMENFASSUNG

The gradient-performance limits of capillary ion chromatography have been assessed at maximum system pressure (34.5 MPa) using capillary columns packed with 4.1 μm macroporous anion-exchange particles coated with 65 nm positively-charged nanobeads. In analogy to the van-Deemter curve, the gradient performance was assessed applying different flow rates, while decreasing the gradient time inversely proportional to the increase in flow rate in order to maintain the same retention properties. The gradient kinetic-performance limits were determined at maximum system pressure, applying tG/t0=5, 10, and 20. In addition, the effect of retention on peak width was assessed in gradient mode for mono-, di-, and trivalent inorganic anions. The peak width of late-eluting ions can be significantly reduced by using concave gradient, resulting in better detection sensitivity. A signal enhancement factor of 8 was measured for a late-eluting ion when applying a concave instead of a linear gradient. For the analysis of a complex anion mixture, a coupled column with a total length of 1.05 m was operated at the kinetic-performance limit applying a linear 250 min gradient (tG/t0=10). The peak capacity varied between 200 and 380 depending on analyte retention, and hence on charge and size of the ion.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Trifluoressigsäure, ReagentPlus®, 99%
Sigma-Aldrich
Trifluoressigsäure, suitable for HPLC, ≥99.0%
Sigma-Aldrich
Ameisensäure, reagent grade, ≥95%
Sigma-Aldrich
Kaliumbromid, FT-IR grade, ≥99% trace metals basis
Sigma-Aldrich
Ameisensäure, ACS reagent, ≥96%
Sigma-Aldrich
Ameisensäure, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥98%
Sigma-Aldrich
Trifluoressigsäure, puriss. p.a., suitable for HPLC, ≥99.0% (GC)
Sigma-Aldrich
Natriumthiosulfat, ReagentPlus®, 99%
Sigma-Aldrich
Natriumiodid, ACS reagent, ≥99.5%
Sigma-Aldrich
Ameisensäure, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Natriumthiosulfat, purum p.a., anhydrous, ≥98.0% (RT)
Sigma-Aldrich
Natriumiodid, ReagentPlus®, ≥99%
Sigma-Aldrich
Oxalsäure, 98%
Sigma-Aldrich
Trichloressigsäure -Lösung, 6.1 N
Sigma-Aldrich
Kaliumbromid, ACS reagent, ≥99.0%
Sigma-Aldrich
Ameisensäure, ACS reagent, ≥88%
Sigma-Aldrich
Trifluoressigsäure, ≥99%, for protein sequencing
Sigma-Aldrich
Propionsäure, ≥99.5%
Sigma-Aldrich
Buttersäure, ≥99%
Sigma-Aldrich
Natriummolybdat, ≥98%
Sigma-Aldrich
Oxalsäure, ReagentPlus®, ≥99%
Sigma-Aldrich
DL-Apfelsäure, ReagentPlus®, ≥99%
Sigma-Aldrich
Phenylessigsäure, 99%
Sigma-Aldrich
Kaliumbromid, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99%
Sigma-Aldrich
Natriumiodid, 99.999% trace metals basis
Sigma-Aldrich
Natriumthiosulfat, ≥99.99% trace metals basis
Sigma-Aldrich
D-(−)-Weinsäure, ReagentPlus®, 99%
Sigma-Aldrich
Trichloressigsäure, ACS reagent, ≥99.0%
Sigma-Aldrich
Isobuttersäure, 99%
Sigma-Aldrich
Oxalsäure, purified grade, 99.999% trace metals basis