Direkt zum Inhalt
Merck

Development of a green binder system for paper products.

BMC biotechnology (2013-03-28)
Ashley R Flory, Deborah Vicuna Requesens, Shivakumar P Devaiah, Keat Thomas Teoh, Shawn D Mansfield, Elizabeth E Hood
ZUSAMMENFASSUNG

It is important for industries to find green chemistries for manufacturing their products that have utility, are cost-effective and that protect the environment. The paper industry is no exception. Renewable resources derived from plant components could be an excellent substitute for the chemicals that are currently used as paper binders. Air laid pressed paper products that are typically used in wet wipes must be bound together so they can resist mechanical tearing during storage and use. The binders must be strong but cost-effective. Although chemical binders are approved by the Environmental Protection Agency, the public is demanding products with lower carbon footprints and that are derived from renewable sources. In this project, carbohydrates, proteins and phenolic compounds were applied to air laid, pressed paper products in order to identify potential renewable green binders that are as strong as the current commercial binders, while being organic and renewable. Each potential green binder was applied to several filter paper strips and tested for strength in the direction perpendicular to the cellulose fibril orientation. Out of the twenty binders surveyed, soy protein, gelatin, zein protein, pectin and Salix lignin provided comparable strength results to a currently employed chemical binder. These organic and renewable binders can be purchased in large quantities at low cost, require minimal reaction time and do not form viscous solutions that would clog sprayers, characteristics that make them attractive to the non-woven paper industry. As with any new process, a large-scale trial must be conducted along with an economic analysis of the procedure. However, because multiple examples of "green" binders were found that showed strong cross-linking activity, a candidate for commercial application will likely be found.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Gelatine -Lösung, Type B, 2% in H2O, tissue culture grade, BioReagent, suitable for cell culture
Sigma-Aldrich
Gelatine aus Schweinehaut, gel strength 300, Type A
Sigma-Aldrich
Gelatine aus Schweinehaut, powder, gel strength ~300 g Bloom, Type A, BioReagent, suitable for electrophoresis, suitable for cell culture
Sigma-Aldrich
Gelatine aus Haut von Kaltwasserfischen, solid
Sigma-Aldrich
Gelatine aus Rinderhaut, Type B, powder, BioReagent, suitable for cell culture
Sigma-Aldrich
Pektin aus Citrusfrüchten (Schalen), Galacturonic acid ≥74.0 % (dried basis)
Sigma-Aldrich
Zein aus Mais
Sigma-Aldrich
Gelatine aus Rinderhaut, gel strength ~225 g Bloom, Type B
Sigma-Aldrich
Gelatine aus Schweinehaut, gel strength 80-120 g Bloom, Type A
Sigma-Aldrich
Gelatine aus Schweinehaut, gel strength ~175 g Bloom, Type A
Sigma-Aldrich
Gelatine aus Rinderhaut, Type B
Sigma-Aldrich
Prionex® Highly purified Type A, aqueous solution
Sigma-Aldrich
Gelatine aus Schweinehaut, Type A, lyophilized powder, γ-irradiated, BioXtra, suitable for cell culture
Sigma-Aldrich
Gelatine, tested according to Ph. Eur.
Supelco
Pektin, for use with Total Dietary Fiber Control Kit, TDF-C10
Millipore
Gelatine aus Schweinehaut, medium gel strength, suitable for microbiology
Millipore
Gelatine aus Schweinehaut, suitable for microbiology, high gel strength
Millipore
Gelatine aus Schweinehaut, suitable for microbiology, low gel strength
Millipore
Gelatine aus Schweinehaut, suitable for microbiology, ultrahigh gel strength