Pular para o conteúdo
Merck

Wettability and surface free energy of polarised ceramic biomaterials.

Biomedical materials (Bristol, England) (2015-01-15)
Miho Nakamura, Naoko Hori, Saki Namba, Takeshi Toyama, Nobuyuki Nishimiya, Kimihiro Yamashita
RESUMO

The surface modification of ceramic biomaterials used for medical devices is expected to improve osteoconductivity through control of the interfaces between the materials and living tissues. Polarisation treatment induced surface charges on hydroxyapatite, β-tricalcium phosphate, carbonate-substituted hydroxyapatite and yttria-stabilized zirconia regardless of the differences in the carrier ions participating in the polarisation. Characterization of the surfaces revealed that the wettability of the polarised ceramic biomaterials was improved through the increase in the surface free energies compared with conventional ceramic surfaces.

MATERIAIS
Número do produto
Marca
Descrição do produto

Sigma-Aldrich
Fosfato de sódio, ACS reagent, ≥99.0%
Sigma-Aldrich
Carbonato de sódio, powder, ≥99.5%, ACS reagent
Sigma-Aldrich
Carbonato de sódio, ACS reagent, anhydrous, ≥99.5%, powder or granules
Sigma-Aldrich
Fosfato de sódio, puriss. p.a., ACS reagent, anhydrous, ≥99.0% (T)
Sigma-Aldrich
Fosfato de sódio, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E 339, anhydrous, 98-100.5% (calc. to the dried substance)
Sigma-Aldrich
Carbonato de sódio, ACS reagent (primary standard), anhydrous, 99.95-100.05% dry basis
Sigma-Aldrich
Carbonato de sódio, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Nitrato de cálcio, ≥99.0%
Sigma-Aldrich
Carbonato de sódio, puriss., meets analytical specification of Ph. Eur., BP, NF, FCC, E500, anhydrous, 99.5-100.5% (calc. to the dried substance)
Sigma-Aldrich
Zirconium(IV) oxide, powder, 5 μm, 99% trace metals basis
Sigma-Aldrich
Fosfato de sódio, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99.0%
Sigma-Aldrich
Fosfato de sódio, ≥98.5% (titration)
Sigma-Aldrich
Carbonato de sódio, anhydrous, powder, 99.999% trace metals basis
Sigma-Aldrich
Sodium phosphate dibasic solution, BioUltra, 0.5 M in H2O
Sigma-Aldrich
Zirconium(IV) oxide, nanopowder, <100 nm particle size (TEM)
Sigma-Aldrich
Carbonato de sódio, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99.5%
Sigma-Aldrich
Fosfato de sódio, 99.95% trace metals basis
Sigma-Aldrich
Fosfato de sódio, BioUltra, ≥99.5% (T)
Sigma-Aldrich
Nitrato de cálcio, suitable for cell culture, suitable for plant cell culture
Sigma-Aldrich
Carbonato de sódio, BioUltra, anhydrous, ≥99.5% (calc. on dry substance, T)
Sigma-Aldrich
Carbonato de sódio, BioXtra, ≥99.0%
Supelco
Carbonato de sódio, reference material for titrimetry, certified by BAM, >99.5%
Sigma-Aldrich
Zirconium(IV) oxide, 99.99% trace metals basis (purity excludes ~2% HfO2)
Sigma-Aldrich
Fosfato de sódio, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Carbonato de sódio, anhydrous, free-flowing, Redi-Dri, ReagentPlus®, ≥99.5%
Supelco
Phosphate Standard for IC, TraceCERT®, 1000 mg/L phosphate in water (nominal concentration)
Sigma-Aldrich
Fosfato de sódio, BioXtra, ≥99.0%
Sigma-Aldrich
Zirconium(IV) oxide, nanoparticles, dispersion, <100 nm particle size (BET), 10 wt. % in H2O
Supelco
Sodium carbonate concentrate, 0.1 M Na2CO3 in water, eluent concentrate for IC
Sigma-Aldrich
Carbonato de sódio, anhydrous, free-flowing, Redi-Dri, ACS reagent (primary standard), 99.95-100.05% dry basis