PCC300C01

Cápsula Pellicon^® com membrana Ultracel^®

pore size 300 kDa, C Screen, 0.1 m²

• Sinônimo(s): Pellicon^® Capsule with Ultracel^® Membrane
• Código UNSPSC: 41104903

Propriedades

• Materiais: EPDM rubber seal; PPO/PS blend (core); PPO/PS blend housing; TPE seal; composite regenerated cellulose (CRC) membrane; epoxy adhesive; polyester screen; polypropylene screen; polyurethane adhesive
• Nível de qualidade: 400
• esterilidade: sterile; γ-irradiated
• linha de produto: Pellicon^®
• condição de armazenamento: room temperature (15-30°C)
• Parâmetros: 4-6 L/min-m² flow rate; 45 psi max. transmembrane pressure (3.1 bar) at 4-30 °C (Forward); 80 psi max. inlet pressure (5.5 bar) at 4 - 30 °C
• técnica(s): ultrafiltration: suitable
• Comprimento: 35.3 cm (13.9 in.)
• Diâmetro: 3.8 cm (1.5 in.)
• área de filtração: 0.1 m²
• tamanho da tela: , Type C screen (coarse screen)
• volume: 28 mL , in feed channel; 60 mL , in permeate channel
• Impurezas: ≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m²)
• matriz: Ultracel^®
• tamanho de poro: 300 kDa
• faixa de pH: 2-13
• conector: inlet/outlet connection (Feed: 3/4" Sanitary Flange); inlet/outlet connection (Permeate: 3/4" Sanitary Flange); inlet/outlet connection (Retentate: 3/4" Sanitary Flange)

Descrição

Descrição geral

The Pellicon^® Capsule is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied sterilized by irradiation.

Aplicação

Viral Gene Therapies, Vaccines, Concentration, Diafiltration, Buffer exchange, Protein purification, mRNA

Características e benefícios

Plug ′n play, holderless design - easy to install, safe to remove
Gamma sterilized and preservative-free - ready to process in minutes
True single-use, self-contained capsule - fast, safe, and flexible batch turnaround
Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

Embalagem

A foam clamshell is inserted over the end caps on both ends of the capsule which is then double-bagged and vacuum sealed. The double-bagged capsule is placed on a tray and then individually boxed.

Outras notas

The Emprove^® Program complements the product portfolio through

Comprehensive documentation to support qualification, risk assessment and process optimization needs.
Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
Convenient 24/7 access to up-to-date product information.

Informações legais

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany