PCC030C10G

Cápsula Pellicon^® com membrana Ultracel^®

pore size 30 kDa, C Screen, 1 m² manifold with AseptiQuik^® G connectors

• Código UNSPSC: 41104903

Propriedades

• Materiais: EPDM rubber seal; PPO/PS blend housing; TPE seal; cellulose screen (Composite Regenerated); composite regenerated cellulose (CRC) membrane; epoxy adhesive; epoxy device (Potting, BPA-free); polyester screen; polypropylene screen; polyurethane adhesive; polyurethane device (Pottin)
• Nível de qualidade: 400
• descrição: C Screen, 1 m² manifold with AseptiQuik^® G connectors
• esterilidade: sterile; γ-irradiated
• Características: holdup volume 254 mL (in feed channel); holdup volume 306 mL (in permeate channel)
• Parâmetros: max. inlet pressure at 75 psi (5.1 bar) and 4-30 °C; max. transmembrane pressure at 50 psi (3.5 bar) and 4-30 °C; 4-8 L/min-m² flow rate
• técnica(s): ultrafiltration: suitable
• capsule L × W × H: 19.56 cm (7.7 in.) × 34.37 cm (13.53 in.) × 40.46 cm (15.93 in.)
• área da membrana: 1 m²
• screen H: 15.9 in. (40.5 cm)
• screen L: 7.7 in. (19.6 cm) , Length
• screen W: 13.5 in. (34.4 cm)
• Impurezas: ≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m²)
• Matriz: Ultracel^®
• tamanho de poro: 30 kDa
• faixa de pH: 2-13
• conector: inlet/outlet connection (Feed: AseptiQuik^® G Connector); inlet/outlet connection (Permeate: AseptiQuik^® G Connector); inlet/outlet connection (Retentate: AseptiQuik^® G Connector)
• temperatura de armazenamento: 15-25°C

Descrição

Descrição geral

The Pellicon^® Capsule with Ultracel Membrane is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied gamma sterilized with preservative-free reverse osmosis water. This new addition to the Pellicon^® family shares the same unbeatable performance of Pellicon^® cassettes featuring C Screen, 1 m² manifold with AseptiQuik^® G connectors. This device is linearly scalable, making it easy to transition between both formats.

Pellicon^® Capsules are ideal for the filtration of solutions that require single-use capabilities, including:

-Rapid batch turnaround for higher plant productivity
-Lower risks of product cross-contamination
-Self-contained device for increased operator safety
-Process flexibility for multi-product manufacturing facilities
-Optimum use of time and resources from minimal device preparation

Membrane

Pellicon^® Capsules with Ultracel membrane are designed for excellent product retention, recovery, and high yields. Ultracel void-free composite membranes combine ultra-low protein binding, low fouling, and organic solvent resistance with superb mechanical strength.

Aplicação

Concentration, Diafiltration, Buffer exchange, Protein purification

Características e benefícios

• Plug ′n play, holderless design - easy to install, safe to remove
• Gamma Sterilized and preseravtive-free - ready to process in minutes
• True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
• Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
• Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

Embalagem

A foam pouch is inserted over the end caps on both ends of the capsule which is then double-bagged and vacuum sealed. The double-bagged capsule is then placed on a tray and individually boxed.

Outras notas

Screen Type: Type C screen (coarse screen)

The Emprove^® Program complements the product portfolio through

• Comprehensive documentation to support qualification, risk assessment and process optimization needs.
• Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
• Convenient 24/7 access to up-to-date product information.

Informações legais

AseptiQuik is a registered trademark of Colder Products Company

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany