P3B010A00

Cassete Pellicon^® 3 com membrana Biomax^®

10kDa, A Screen, 88 cm²

• Sinônimo(s): Pellicon^® 3 Cassette with Biomax^® 10 kDa Membrane, A Screen, 88cm²
• Código UNSPSC: 23151806
• eCl@ss: 32031623
• NACRES: NB.24

Propriedades

• Materiais: TPE seal; polyethersulfone membrane (void free); polypropylene ; polypropylene cap (for end); polypropylene screen
• Nível de qualidade: 400
• Características: holdup volume 1.8 mL (in feed channel)
• fabricante/nome comercial: Pellicon^®
• Parâmetros: 30 psi max. reverse press. exposure at 25 °C (for 24 hours); 4-6 L/min-m² recirculation rate; 40 psi max. transmembrane pressure at 4-50 °C; 5.5 bar max. inlet pressure (80 psi) at 30 °C; 5.5 bar max. transmembrane pressure (80 psig) at 30 °C; 6.9 bar max. inlet pressure (100 psi); 80 psi max. transmembrane pressure at 4-40 °C
• técnica(s): analytical sample preparation: suitable; buffer exchange: suitable; protein purification: suitable (concentration)
• Altura: 0.8 cm (0.33 in.)
• Comprimento: 20.6 cm (8.1 in.)
• Largura: 5.6 cm (2.2 in.)
• área de filtração: 88 cm²
• área da membrana: 88 cm²
• extraíveis gravimétricos: ≤1500 mg/m²
• matriz: Biomax^® (Membrane)
• tamanho de poro: 10 kDa NMWCO
• pH: 1-14
• Condições de expedição: ambient

Descrição

Descrição geral

Pellicon^® 3 filtration devices are advanced, high-performance cassettes ideal for today’s higher titer therapeutic antibodies as well as the more demanding filtration processes that require higher operating pressures, temperatures and caustic cleaning regimes.

The Pellicon^® 3 Cassette with Biomax^® Membrane is perfect for the filtration of monoclonal antibodies and solutions containing albumin, hormones, vaccines and growth factors.This P3B010A00 Pellicon^® 3 ultrafiltration device features a pore size of 10 kDa NMWCO, a filtration area of 88 cm², a Biomax^® 10 membrane, and dimensions measuring 0.8 cm (H) x 5.6 cm (W) x 20.6 cm (L).

Características e benefícios

• Rugged & reliable – ideally suited for today′s more demanding filtration processes
• High performance – produces excellent resolution, yields and back-pressure resistance
• Optimum product recovery – thanks to proven membrane technology
• Void-free technology – leading-edge membranes resolve virtually any separation challenge
• Defect-free, superior adhesion – Ultracel^®uses composite membranes cast on a microporous substrate
• Automated manufacturing – delivers unbeatable performance, consistency and reliability
• Easy installation & care – simple to install and maintain

Outras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Nota de análise

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Informações legais

BIOMAX is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany

Informações de segurança

• Código de classe de armazenamento: 12 - Non Combustible Liquids
• Classe de risco de água (WGK): WGK 1