Pular para o conteúdo
Merck
Todas as fotos(1)

Documentos Principais

Visualizar Toda a Documentação

651826

Sigma-Aldrich

Chromium etchant

standard

Sinônimo(s):

Cr etching solution

Faça loginpara ver os preços organizacionais e de contrato

Selecione um tamanho

500 ML
R$ 732,00

R$ 732,00

Check Cart for Availability
Solicite uma grande encomenda
Todas as fotos(1)

Selecione um tamanho

Alterar visualização
500 ML
R$ 732,00

About This Item

Número MDL:
MFCD07370678
Código UNSPSC:
12352300
NACRES:
NA.23

R$ 732,00

Check Cart for Availability
Solicite uma grande encomenda

grau

standard

composição

volatiles, 85%

cor

orange

p.e.

100 °C/1 atm

densidade

1.16 g/mL at 25 °C

Categorias relacionadas

Descrição geral

  • Appearance - Clear orange
  • pH - Acidic
  • Etch Rate at 40 °C - 40 Å/second
  • Etch Capacity (rate declines at ~70%) - 65 g/gallon
  • Shelf Life - 1 year
  • Storage Conditions - Ambient
  • Filtration - 0.2 µm
  • Recommended Operating Temperatures - 20-80 °C (30-40 °C most common)
  • Rinse - Deionized water
  • Photoresist Recommendations - KLT6000 Series, KLT 5300 Series, HARE SQT (SU-8 type), TRANSIST, or PKP -308PI
  • Select Compatible Materials - Au, Ti, oxide, nitride, Si
  • Select Incompatible Materials - Al, Ni, Cu, NiCr
  • Compatible Plastics - HDPE, PP, PTFE, PFA, PVC
  • Isotropy - Isotropic
  • Incompatible Chemicals - Strong bases
Ceric ammonium nitrate-based etchant. Etch rate of 40 Å/sec @ room temp. Etches cleanly with only a deionized water rinse needed.
Chromium etchant is a chromium based solution that removes the excess metal from the substrate. These etchants are majorly used in metal finishing and electronic industry. It has an etch rate of 4 mm/s and can be used to etch nickel, copper, and chromium based excess metals.[1][2][3][4]
Our chromium etchant is high purity ceric ammonium nitrate system for precise, clean etching of chromium and chromium oxide films. Compatible with positive and negative photoresists. Our chromium etchant is filtered to remove all particulates above 0.2 microns. Etching temperature varies depending on film thickness. Etch times range from 15 seconds to 60 seconds at room temperature. Chromium Etchants should be operated in a well-ventilated hood.

Aplicação

For use at room temperature or elevated temperature. Etches cleanly, eliminating need for an intermediate rinse. Etching temperature varies with regard to film thickness. Etch times range from 15 to 60 seconds at room temperature. Note, chromium etchants should be handled in a well ventilated hood.
The product can etch Al, Cr, Cu, Ni, GaAs. It can surface oxidize Si, Ta/TaN, however, it has no effect on Au, Si3N4, SiO2, Ti, and W surfaces[5]

Características e benefícios

Designed for precise, clean etching of chromium and chromium oxide films. Compatible with both positive and negative photoresists. Filtered to 0.2 micron to remove particlulates.

Palavra indicadora

Danger

Frases de perigo

H272,H290,H314,H317,H411

Classificações de perigo

Aquatic Chronic 2 - Eye Dam. 1 - Met. Corr. 1 - Ox. Liq. 2 - Skin Corr. 1B - Skin Sens. 1

Perigos de suplementos

EUH071

Código de classe de armazenamento

5.1B - Oxidizing hazardous materials

Classe de risco de água (WGK)

WGK 3

Ponto de fulgor (°F)

Not applicable

Ponto de fulgor (°C)

Not applicable

Escolha uma das versões mais recentes:

Certificados de análise (COA)

Lot/Batch Number
MKCW6429
MKCV2641
MKCT6171
MKCS3415
MKCQ5677

Não está vendo a versão correta?

Se precisar de uma versão específica, você pode procurar um certificado específico pelo número do lote ou da remessa.

Pesquise por COA

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Os clientes também visualizaram

Slide 1 of 2

1 of 2

Negative resist remover I

Sigma-Aldrich

651761

Negative resist remover I

Negative photoresist I

Sigma-Aldrich

651796

Negative photoresist I

Thermoelectric microconverter for energy harvesting systems.
Carmo J, et al.
IEEE Transactions on Industrial Electronics, 57(3), 861-867 (2010)
Pressure-driven Fermi surface reconstruction of chromium
Stillwell RL, et al.
Physical Review, 88(12) (2013)
F J Alfaro-Mozaz et al.
Nature communications, 8, 15624-15624 (2017-06-08)
Polaritons in layered materials-including van der Waals materials-exhibit hyperbolic dispersion and strong field confinement, which makes them highly attractive for applications including optical nanofocusing, sensing and control of spontaneous emission. Here we report a near-field study of polaritonic Fabry-Perot resonances
Fabrication and Mechanical Properties Measurements of 3D Microtissues for the Study of Cell-Matrix Interactions.
The Surfaceome, 120(5), 303-328 (2018)
The regeneration and recycle of chromium etching solutions using concentrator cell membrane technology.
Chaudhary AJ, et al.
Chemosphere, 62(5), 841-846 (2006)
Exibir todos os documentos relacionados

Protocolos

Negative Photoresist Procedure

Photoresist kit offers pre-weighed chemical components for lithographic processes, with separate etchants for various substrate choices.

Questions

1–3 of 3 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  3. Does this product etch Ti and TiO2? If so, what is the etch rate?

    1 answer

    1. The chromium etchant, product 651826, is compatible with titanium, meaning it does not etch titanium. While there is no specific information on TiO2, it is assumed that the same is true. The etch rate at 40°C is 40 Å/sec, and the rate will approximately double with every 10°C increase in temperature. Additionally, the rate of stirring or agitation will also increase the etch rate.

      Helpful?

Reviews

No rating value

Active Filters

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica